Popularization of basic knowledge of power safety production standardization

1.1 Definition of safety production standardization:

Through the establishment of a safety production responsibility system, develop safety management systems and operational procedures, investigate and manage hidden dangers and monitor major hazards, establish risk analysis and pre-control mechanisms, standardize production behaviors, and ensure that all production links comply with relevant safety production laws, regulations and standards. Requirements, people, equipment, environment, management are in good condition, and continuous improvement, and constantly strengthen the standardization of enterprise safety production.

1.2 "Safety Production Standardization Specifications for Power Generation Enterprises and Standards for Compliance" Important Standards

In August 2011, the “Standards for Safety Production Standardization and Standards for Compliance” (Electricity Supervision Safety [2011] No. 23) was jointly issued by the former SERC and the State Administration of Safety Supervision.

1.3 Relevant policy documents and requirements

On May 3, 2011, the State Council’s Security Committee issued the “Guiding Opinions of the State Council’s Security Committee on Deepening the Standardization Construction of Enterprise Safety Production” (Anhui [2011] No. 4), requiring serious self-examination of power safety production standardization. Self-evaluation, comprehensively promote the standardization of enterprise safety production, further standardize the safe production behavior of enterprises, improve the conditions of safe production, strengthen the basic management of safety, effectively prevent and resolutely curb the occurrence of serious accidents.

In August 2011, the State Electricity Regulatory Commission and the State Administration of Work Safety jointly issued the “Guiding Opinions on In-depth Work on Standardization of Power Safety Production” (Electricity Supervision Safety [2011] No. 21) and “Safety Standardization Specifications for Power Enterprises”. The Standards for Compliance (Electricity Supervision Safety [2011] No. 23) have put forward requirements for standardizing and strengthening the construction of safety production standardization, and pointed out that efforts should be made to achieve standardization of enterprises above designated size before the end of 2013, and all enterprises will meet the standards before the end of 2015 to ensure In general, accidents and accidents are investigated and dealt with in a timely manner. Major accidents are rectified or monitored. Staff safety awareness and operational skills are improved. The “three violations” phenomenon is effectively banned, the intrinsic safety level of enterprises is significantly improved, and the ability to prevent accidents is significantly strengthened. The overall goal of further improvement of the situation.

On September 21, 2011, the Electricity Regulatory Commission issued the “Measures for the Administration of Standards for the Standardization of Electric Power Safety Standards” (Electricity Supervision Safety [2011] No. 28) and the “Implementation Rules for the Standardization of Electric Safety Production Standardization” (Office Security [2011] No. 83) ), and formulated implementation measures such as evaluation and certification, evaluation agency management and evaluation of appraisers, to further standardize the safety production standardization construction of power companies.

Standard analysis

1.4 Basic composition of standardization and regulation of power generation enterprises

Contents of thirteen aspects: safety production objectives, organization and responsibilities, safety production inputs, laws and regulations and safety management systems, education and training, production equipment and facilities, operational safety, hidden danger investigation and management, major hazard monitoring, occupational health, Emergency rescue, information reporting and accident investigation processing, performance evaluation and continuous improvement.

1.5 specific score:

Including thermal power, hydropower, wind power enterprise safety production standardization content, a total of 139 terms, the total standard score of 1800 points:

Thermal power: A total of 119, 1500 points, of which 41, 500 points for safety management; 46, 500 points for equipment and facilities; 20, 400 points for occupational safety; 12, 100 points for occupational health.

Hydropower: a total of 114, 1500 points, of which 41, 500 points for safety management; 41, 500 points for equipment and facilities; 20, 400 points for occupational safety; 12 for occupational health, 100 points.

Wind power: a total of 92, 1350 points, of which 41, 500 points for safety management; 25, 410 points for equipment and facilities; 19, 380 points for occupational safety; 7 and 60 points for occupational health.

1.6 At the end of September 2013, the level of compliance of the first-level enterprises

Level 1 enterprises that have reached the standard: 137

Enterprises that have completed the first-level review and are being publicized: 31

Companies that are conducting first-level reviews: 54

1.7 Which power companies should be standardized

Power generation companies (thermal power, hydropower, wind power)

? Transmission enterprise

? City-level power supply companies

? Power engineering construction projects with a construction period of more than two years

? Other power companies and power engineering construction projects refer to implementation

Remarks: Power generation enterprises, transmission enterprises and prefecture (city) power supply enterprises refer to enterprises directly engaged in power generation, transmission, substation and power supply operation management.

The construction period refers to the construction period determined in the feasibility study report of the power engineering construction project.

1.8 Implementation standards

? "Standardization of Safety Production Standardization and Compliance Standards for Power Generation Enterprises" (Electricity Supervision Safety [2011] No. 23)

? "Grid Enterprise Safety Production Standardization Specifications and Standards for Compliance"

? "Safety Production Standardization Specifications and Compliance Standards for Power Engineering Construction Projects"

1.9 rating

The results of the safety safety production standardization rating assessment are divided into first, second and third grades, with the highest level and the lowest level. If you get more than three levels, it is the safety production standardization standard, among which:

(1) The standardized first-level score is greater than 90 points;

(2) The standardized secondary score is greater than 80 points;

(3) The standardized secondary score is greater than 70 points.

Review score = (real score / should be scored) × 100. Among them, the actual score is the sum of the actual scores of the scoring items; the score should be the sum of the standard scores of the scoring items.

1.10 Administration

The national electric power safety production standardization work is led by the energy regulatory agency, and the safety production supervision and management department participates in the implementation of the hierarchical management. Among them, the first level is led by the National Energy Administration, and the State Administration of Work Safety is involved; the second and third levels are led by the dispatched agencies of the National Energy Administration, and the provincial safety production supervision and management departments participate.

Handheld Reader

PT361 reader is used together with your smart phone(smaller than 95*185mm). The data will display on your smart phone when reading a tag by connecting via bluetooth . It can be connected to both Android and IOS phone. You can use it together with your own software.

Wuxi FOFIA was founded in 2002 in Jiangsu, We develop and manufacture a large range of animal ID products including injectable microchips,Animal temperature microchips, LF ear tags, UHF ear tags ,visual ear tags and all kinds of RFID readers. We provide complete hardware solutions for animal husbandry in various countries around the world.
Our products can used for cattle, sheep, goat, pig, fish, pets and wild animals and we have exported to more than 90 countries during the past 20 years.
FOFIA has won a good reputation with our high-quality products, fast delivery time and excellent after-sales service. We do our own brand and also we welcome all kinds of OEM.
We have skilled workers, fully automated production lines and a professional technical team. Welcome customers all over the world to come to us to discuss cooperation, we will provide you with a satisfactory solution.

Handheld Animal Reader, Ear Tag Reader, Ear Tag bluetooth Reader

Wuxi FOFIA Technology Co.,Ltd. , https://www.fofiatag.com