What to do if the paint is scratched? Teach you 6 ways to repair car scraping

When we drive outside, it is inevitable that we may encounter bumps sometimes. But it is not advisable to move like the above video. We can take insurance. Come and talk to you today about six small tricks to repair car scrapings.

1, slight, need to look carefully to see the scratches

This is a slight scraping. There will be a scraping mark. It can be wiped off by rubbing with a wet towel twice. The scratches are not obvious. Waxing can be done directly, even if there is no mercerized wax. It is also good.

2, can see there are obvious scratches, did not hurt the paint

After this kind of wet towel is wiped off, there will be more obvious scratches. For example, water waxes, soft waxes, etc. added with abrasives can be used as solid liquids.

There is also a more folk approach, toothpaste. Clean the paint first, wipe it with a soft towel with toothpaste, and wipe it off with a clean towel. Bad effects can be wiped several times.

3, Injured paint, but did not hurt the paint

After the surface is cleaned and cleaned, waxing or polishing is recommended. It is recommended to use wax or soft wax.

4, scratches hurt the primer

This is a more serious scraping, under the primer is the steel plate, do not worry about waxing, after the first clean with a paint pen (scratch repair pen) touch up the paint, the steel plate is completely covered, and then dried and then waxed and polished . No point paint pen can be used toothpaste first, the method above, toothpaste is a certain rust effect. If it is bumper damage, you don't need to care about rust because the bumper is plastic.

5, the steel plate has begun to rust

This uses fine sandpaper. First, take a fine sandpaper to polish the rust, remove the rust and polish the scratches, and then wash it. Then use a paint pen (scratch repair pen) to make up the paint and completely cover the steel plate. Stay, dry and polish. No point paint pen can be used toothpaste first, the method above, toothpaste is a certain rust effect.

6, large area leakage primer

This proposal we re-painted, if you consider the insurance issue choose not to repair, you can first do anti-rust treatment (toothpaste), and then marked with a layer of wax, to repair as far as possible to repair, this time you can choose the largest coarse wax abrasive particles If not, water wax can also be used.

From the above we can see that there are several tools that are indispensable, such as water wax, soft towel (two pieces), point paint pen, and fine sandpaper, so these basic common tools can be prepared.

Arm Hanger

we provide Double Needle Bar Machine arm hanger, lace knitting machine arm hanger, micorfiber terry machine arm hanger. we also provide bearings together with the hanger.

as a Warp Knitting Machine manufacture, we provide wide range and high quality spare parts in the markets. if you have related requirements, pls feel free to contact us.

warp knitting machine spare parts, warp knitting arm hanger, warp kntting machine hanger, arm hanger with bearing

CHANGHZOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.warpknittingmachinery.com