Refrigerator dryer operating structure

If the air dryer is not cooling how to solve? Without cooling, it means that it cannot work properly, and even if it cannot remove water, it is equivalent to not booting. What causes this? First check the heat dissipation of the condenser. In general, the air-cooled condenser should always clean the heat-dissipating aluminum sheet. The heat sink aluminum plays an important role in heat dissipation. Second, check if the refrigerant is enough to see the pressure gauge.

Why do I need a dryer? After the air compressor is compressed, the rear cooler is cooled, the air-water separator is separated, and the compressed air after the buffer tank is regulated is generally saturated. The relative humidity is 100%, and contains impurities such as oil and solid particles. Compressed air cannot be used directly. Drying equipment such as refrigerated dryers are required for drying and purifying.

The main components of the refrigerating dryer are: refrigerating compressor, drying filter, hot gas bypass valve, expansion valve, wind condenser, refrigerant high pressure meter, refrigerant low pressure meter, pressure controller, electronic drain, main contactor, heat exchanger The composition of the dryer is based on the principle of freezing and dehumidification. Compressed air is forced through the evaporator to exchange heat and cool down, so that the gaseous water and oil in the compressed air are isostatically cooled, condense into liquid water and oil, and entrain dust. , through the automatic drain discharge system, so as to obtain clean compressed air.

Beam Latching Machine

It has Single axis and Multi axis processing functions,

Computer programming auto processing

Process tolerance. and process accuracy of machine are up to the industry standard.

Beam Latching Machine,Steel Fabrication Machine,Beam Process Machine,Beam Drill Machine

Shandong ShuoFang Environmental Technology Co., Ltd. , https://www.chinafincnc.com