·The first batch of electric-powered pure electric buses in Tianjin Binhai New Area was officially put into operation

Recently, the first batch of 20 electric-powered pure electric buses in Binhai New Area was put into operation at Beitang Bus Station to Xingang Passenger Terminal 519. The electric-powered pure electric bus has the advantages of low operating noise, zero exhaust emissions, stable operation, etc. The power-operated pure electric bus has a driving range of about 200 kilometers, and the plug-in pure electric bus is about 2 Compared with the charging time of 3 hours, the replacement of the pure electric bus can only take 12 to 15 minutes, which greatly improves the operational efficiency of the bus.
In order to comprehensively carry out the operation and promotion of pure electric buses, implement energy conservation and emission reduction strategies in depth, and promote the construction of resource-saving and environment-friendly society. At the beginning of 2016, Binhai New Area Bus Group and State Grid Tianjin Electric Power Company Electric Vehicle Service Branch (hereinafter referred to as “State Grid Tianjin Electric Vehicle Company”) signed the “Comprehensive Cooperation Agreement for Charge and Replacement Service”. According to the agreement, State Grid Tianjin Electric Vehicle Company will use the professional and large-scale operation advantages to provide quality for coastal public transportation. Safe and reliable charging and replacement services provide support for the promotion and application of pure electric buses in Binhai New Area.
At present, the public transport vehicles owned by Binhai Public Transport, 98.3% of the national IV and above exhaust emission standards, 68% of the new energy vehicles, including 80 pure electric buses. With the steady development of “green bus” construction, Binhai Bus will continue to vigorously put into operation new energy and clean energy buses, and steadily promote the development of “green bus”.

The oil-gas Separation Filter is a device that separates the micro oil droplet to ensure that the lubrication system can work well and almost no micro oil droplet goes out of the air flow of the compressor . Applications: Solid-liquid, gas-solid, gas-liquid separation and purification in the fields of petroleum, chemical, metallurgy, aviation, electronics, power, pharmaceutical, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-fighting equipment, etc.

 

The air from the compressor mains is filled with oil droplets of different sizes. Large oil droplets are easily separated by the oil-gas separation tank, while small oil droplets (suspended) must be filtered by the oil-gas separation filter. The correct choice of glass fiber diameter and thickness is an important factor to ensure the filtration effect. After the element filtered, the small oil droplets are quickly polymerized into large oil droplets, which go to the bottom of the Filter Element. These oils are returned to the lubrication system through the inlet of the return line at the bottom of the filter element, allowing the compressor to discharge relatively pure, high-quality compressed air.

Oil-Gas Separator

Gas Filter,Oil Separation Filter,Separation Filter,Oil Separator

Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl

Posted on