![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
With the advent of summer, many car owners do not know how to maintain their cars. Today, Xiao Bian has popularized some summer maintenance car knowledge for everyone.
1 , summer heat must prevent water shortage
In high-temperature weather, due to the accelerated water evaporation time in the water tank , check the amount of cooling water and pay attention to the water temperature table. To stop immediately found water, but not to immediately add water, the water should wait for a while in Canada, must not immediately open the radiator cap, because the temperature is too high may get burned.
2 , the correct use of air conditioning
Should first open the air conditioning outside the loop. In summer, the temperature inside the car is often very high. Therefore, do not immediately turn on the air conditioner when the car starts. You should open all the windows for 3-5 minutes before the hot air is exhausted and then turn on the air conditioner. This will have better results. If the engine is in a heavy load for a long time, the air conditioner should be turned off temporarily. When the air-conditioning cooling, the wind direction is best blown upwards, because the cold air will sink, the wind direction gear is best to choose to blow the face block, adjust the outlet is the best effect. Finally, notice that air conditioning is turned off before the destination to reduce the generation of odors.
3, compressor and condenser
After the refrigeration system is deactivated, the compressor should be operated for more than 10 minutes every two weeks; the belt tension of the compressor should be checked regularly; if it is found that the oil leakage from the refrigerator should be dealt with promptly; the condenser must be cleaned regularly to prevent oil, dirt and debris Attached to the condenser heatsink.
4 , tire tire pressure
For tires must be checked, if the pattern is worn out, replace the new tire. The air pressure in the tires in the summer will increase with the increase of the temperature, and it will often cause a puncture accident. At the same time, speeding, overloading or emergency braking will easily lead to punctures. Therefore, the tire pressure can be appropriately reduced, or the tire can be filled with helium that has more stable physical properties and is difficult to expand.
5 , Wiper blade inspection
Due to the large amount of rain in the summer, the frequency of use of the wiper blades of vehicles is very high. Therefore, it is particularly important to strengthen the inspection of the wiper blades. In addition to regular inspections, attention should be paid to the cleaning of the wipers to prevent the wipers from accumulating dust and impurities and affecting the wiper effect, or to have an adverse effect on the front glass of the car. The phenomenon of scratches is troublesome. Once the wiper blade work is not ideal, it must be repaired and replaced in a timely manner, not because of small losses.
6 , summer high temperature air resistance
Due to the high temperature in summer, the cooling rate is limited, the driving speed of the vehicle is slow, the engine speed is high, the heat dissipation is difficult, and the “ air drag †of the vehicle is liable to occur . Sometimes it is difficult to start the engine after a few minutes of stoppage and the oil supply is interrupted. Once the air resistance occurs, the driver should immediately stop cooling, troubleshooting, if your car is a hydraulic brake, driving at a high temperature under high speed, brake fluid prone to air "vapor lock", making a sudden brake failure caused the accident.
7 Body Care
Rainfall is more common in summer and autumn. Rain and rain in the rain, combined with strong sunlight, and gums that fall onto the car's surface can cause corrosion and oxidation of the paint. After a prolonged period of rain and sun, your car's face must have been devastated and overwhelmed. Therefore, it is necessary to do a series of beauty treatments such as cleaning, polishing, waxing, and sealing glaze. Even if your car body is already coated with paint, you should give it a good care and clean it up.
8. Sterilization of car interior
In the spring and summer, it is very important to do a good job of car disinfection. Ventilate regularly and clean the exterior and interior of the car regularly. When cleaning, you can use your own disinfectant to scrub, if you have time, you can also go to a specialized maintenance shop with ultraviolet light irradiation or high temperature sterilization. However, it must be noted that the disinfection of the air inside the compartment is carried out without anybody in the vehicle. After the disinfection is completed, it is necessary to open the window and ventilate it for 5 to 6 minutes. Wipe the equipment in the compartment with clean water and wipe it with a clean cotton cloth to remove the residual disinfectant.
What are you waiting for? Care about your car! ! !
It uses double platform structure and semi-pit installation, and efficient buffer components are used, which can absorb impact energy of waste steel during weighing, and reduce impact force born by Load Cell.
It can be widely used for weighing steel ladle and iron ladle in steel plant and casting plant
Double platform structure design, thick plate, efficient buffer components, strong impact resistance;
Buffer components absorb impact energy, and improve operating life of load cell;
Buffer components are optional, and high temperature configurations are optional;
Buffer components use suitable pre-tightening force, and reduce weighing stabilization time;
Scale frame has excellent structure, rational limit, quick and reliable weighing.
Customizing according to user`s steel ladle specifications.
Stainless Steel Weight Scale,Weighing Scale For Waste Steel,Scale For Weighing Waste Steel,Waste Steel Weighing Scale
SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com