![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
First, the pump must be installed on a solid foundation or foundation, there should be no loose.
Second, check before starting:
1, the connection parts to be fastened;
2, electric rotation direction should be correct;
3, Clutch flexible and reliable;
4, the pipe connection is firm, reliable seal, the valve is flexible and effective.
Third, before starting, suction pipe, the end of the valve, the pump body must be filled with water, the upper end of the pressure gauge buffer filled with oil.
Fourth, hand rotation, so that the piston reciprocating twice, without obstruction and line insulation is good when no-load start, start, to be normal and then gradually increase the load. Imported pump valve industrial washing machine
Fifth, the operation should pay attention to the sealing of the sealing device, if necessary, be adjusted. Lever and sub-rod to be often oiled.
Sixth, the daily testing of sediment in the sediment should not exceed 10%.
Seventh, there are a few file speed mud pump to make the splash lubrication reliable, should be in each shift will be running a few files speed respectively, the time is not less than 30 seconds.
Eight, is strictly prohibited in the operation of speed, speed change should stop the pump shift.
Nine, abnormal noise or water during operation, the pressure is not normal or there is a clear high temperature should stop the pump check.
Ten, under normal circumstances should be stopped at no-load pump. To stop the pump for a long time, you must open all the drain holes, and release the cylinder head, lift the end of the valve release lever, drain all the mud in the pump body and pipeline.
Long-term deactivation, should be thoroughly cleaned ministries silt, grease, the crankcase to drain the oil, and to take anti-rust, anti-corrosion measures.
This article Keywords: pump
The bin blender machine can execute automatically raising, blending and lowering tasks. One main machine can be configured with multi-bins, So variety blending can be satisfied, consequently it is considered as the ideal blending equipment in pharmaceutical industry. It is widely used in chemical, foodstuff industries, etc.
Bin Blender Equipment ,Bin Blender Machine ,Lifter Equipment,Lifter Machine
Changzhou Jiafa Granulating Drying Equipment Co.,Ltd , https://www.jf-drying.com