Spraying lines in the use of dust spray gun in the course of the problem

Spraying line is the powder coating to the surface of the workpiece, under static electricity, the powder will be evenly adsorbed on the surface of the workpiece to form a powder coating; powder coating through the high temperature baking leveling, into the effect of the (The different effect of the powder coating). In the dusting process, many factors affect the effect of workpiece spraying, the following we specifically say:
1. Dust gun completely solve the problem of dead powder on the workpiece, groove leakage phenomenon.

The spray gun is sprayed onto the workpiece through the spray gun. Crescent fusion technology to absorb the European spray equipment technology developed the fourth generation of intelligent spray gun, the unique circuit board design to shock frequency up to 17KHZ, thus ensuring the high powder on the workpiece, the groove without leakage at the end of the phenomenon.

2. Completely solve the uniformity of the workpiece coating.

To make the powder evenly sprayed, the gun and the elevator chain to match the speed to adjust. Crescent company's unique design allows you to worry about.

In the use of spray lines, often determine the quality of spray spray equipment, the quality of the following factors, one for the uniform and stable film thickness, two for the special-shaped workpiece, can make the powder to overcome the Faraday cage phenomenon, effectively Penetration and spraying. So the performance of the gun will directly determine the effect of powder coating, of course, choose a good quality powder is a prerequisite.
The powder needs to be adsorbed onto the workpiece by carrying the charge, thereby forming an effective coating to protect and decorate the workpiece. Usually use a powder gun capable of producing high-voltage static powder as a powder coating production tool, so that a class of guns will produce high voltage, low current high voltage electric field, the powder particles in which the movement will bring the charge, and then firmly adsorbed to To be painted on the workpiece. Such a process is usually called powder electrostatic spraying. Dust guns in the spray play a very important role.