Drying equipment difficulties how to break through

At present, the scale of domestic large-scale drying enterprises is relatively small compared with foreign enterprises. Moreover, the technology reserves are insufficient and the means of processing equipment are somewhat primitive. At the same time, many dry companies are ignoring the quality of their products in order to pursue profits, and products will experience deviations during use. Therefore, companies should make great efforts to improve the market competitiveness of enterprises, further expand the scale of the company, and further upgrade the quality and technology.

This year, the overall economic operation of the petrochemical industry is not optimistic and it is a challenge for the drying equipment industry. Changes in the situation have not only exerted pressure on the production and operation of industrial enterprises, but also laid a foundation for the transformation and upgrading of industrial enterprises.

China's drying equipment industry has embarked on a virtuous development path and needs to start with the following three aspects.

First, we must speed up the establishment of a standard system. Enterprises should have high requirements on the quality standards of their products, so as to form a sound development. The work of setting the standard of drying equipment from a chemical point of view has not yet been carried out on a large scale, and many drying equipment companies have not attached great importance to the standard. In addition, the standards will regulate the internal management of enterprises, and there are quantitative indicators in the standards. Drying equipment companies should attract sufficient attention.

Secondly, the upgrading of the structure of the equipment itself is relatively minor. Enterprises must strengthen this awareness. When designing and manufacturing drying equipment, the first problem to be recognized and solved is the combination of equipment and process. It must be based on the nature of the material. Determine the device structure. The high-end companies in the dryer equipment industry are all companies that can combine equipment and technology well. They are all companies that have a deep understanding of the downstream users' materials. In the case where many devices fail to use, everyone thinks that it is a problem with the device. In fact, the device and the material do not match. Therefore, companies should attach great importance to the understanding and understanding of downstream user materials in order to design production equipment.

Again, the number of companies is not necessarily large, but companies must have a certain scale and technical level. China's development of drying technology is not a long time. Companies have not experienced large economic fluctuations and large industry reshuffles in the past. The days are considered to be decent and supportive. The law of China's drying industry is that the barriers to entry are relatively low, and ordinary workers can run a company. This is also the reason why the number of companies is relatively large. In addition, downstream users have a wide range of demand for drying equipment, high-end, low-end products are needed, and small and medium-sized drying equipment companies also have room for survival. Of course, the small and medium-sized drying equipment companies will certainly be greatly affected once the downstream demand has large fluctuations.

The background and signification of research this waste tire pyrolysis program

As tire has been used for all other industry widely, they are playing an important role in the development of our economy, but waste tire did not easy to broken after being used and it becomes a big pollution for our environment .Therefore it is urgent to process those waste material without pollution.

In addition ,as the fastest development of world economy ,the shortage of petroleum will be urgent more and more , even the expert had stated that it will have no petroleum recover in earth after 15years later, so searching the new resource becomes an issue which is concerned by all the countries of the world.

1.Working process Of waste tire Pyrolysis Plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

2. Model of waste tire Pyrolysis plant:

Model	Reactor size	Material	Handling capacity	Weight	Seaworthy packing
LJ-8	*22006000mm**	Q245R boiler steel plate	5 tons	24tons	*240HQ**
LJ-9	*22006600mm**	Q245R boiler steel plate	8tons	26tons	*240HQ**
LJ-10	*26006600mm**	Q245R boiler steel plate	10tons	30tons	*140FR+140HQ*

3.End of Product from waste tire Pyrolysis plant

NO.	Name	Percentage	Usage
1	Tyreoil	40%~45%	can be sold* directly as fuel. * can be refine to diesel and gasoline by Oil Distillation Plant
2	Carbon black	37%	* can be sold directly. * can be refined by carbon black processing machine to make it finer (1500mesh finer). *can be made into pellet by pellet machine
3	Steel wire	13%	can be sold* directly as steel or iron.
4	Waste gas	5%	* can be recycled to heat up the reactor

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets.

5. Land requirement: 300sq meters(10m*30m)

6. Exporting Experience:

America:	Brazil, Canada, Colombia, USA,
Middle East:	Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:	Albania , Bosnia and Herzegovina
Asia:	Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:	Ghana, Mozambique, Zambia

Waste Tire Pyrolysis Plant

Waste Tire Pyrolysis Plant,Continuous Waste Tyre Pyrolysis Plant,Pyrolysis Plant,Environmental Waste Tire Pyrolysis Plant

Shangqiu Sihai Energy Technology Co., Ltd , http://www.sihaienergy.com