![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
For the environmental monitoring work in 2014, Wu Xiaoqing said that new progress has been made. On the one hand, the national monitoring system has thoroughly implemented the Air Pollution Prevention and Control Action Plan, and new achievements have been made in air quality monitoring. The central and local governments have invested a total of 436 million yuan and completed the third phase in 177 cities and 552 national control monitoring sites. The construction of new air quality monitoring capability will be completed one year ahead of schedule to complete the monitoring of new air quality standards to achieve full coverage nationwide and build the largest air quality monitoring network in developing countries. From January 1st this year, 1,436 monitoring sites in 338 prefecture-level cities and above all have the ability to monitor new standards and publish six index monitoring data and AQI values ​​in real time. The air quality monitoring and early warning system was initially established. The monitoring and early warning system for heavy air pollution in the Beijing-Tianjin-Hebei region, the Yangtze River Delta, and the Pearl River Delta was completed. The air quality forecasting service was realized and early warning information was issued in a timely manner. During the APEC meeting, Beijing, Tianjin, Hebei, Shandong, Inner Mongolia, Shanxi and other provinces and regions monitored and reported more than 600,000 monitoring data such as PM2.5, and organized and consulted 29 times, effectively guaranteeing that the air quality in Beijing during the conference was maintained. status. A new breakthrough was made in the analysis of the source of atmospheric particulates, and a method and system for analyzing and analyzing the source of ambient air particulates was initially established. At present, nine cities in the first phase have completed source analysis work by taking effective measures to strengthen research and research. The research results show that motor vehicles, industrial production, coal combustion, and dust are the main sources of particulate pollution in ambient air in most cities in China, accounting for about 85%-90%. Supervision over pollution sources, self-monitoring of enterprises, and disclosure of information have been further promoted. In 2014, the national environmental monitoring system undertook the monitoring of pollution sources for more than 14,000 state-controlled enterprises under the reduction of special funds. The monitoring results were published on the websites of environmental protection agencies in all regions, with an average publication rate of 97.9%; all 31 regions in the country The establishment of an enterprise self-monitoring result information publishing platform, with 10,597 national key monitoring companies conducting self-monitoring and publishing information on the platform, with an average publication rate of 91.4%. The environmental monitoring “integration of heaven and earth†is further advanced and the environmental monitoring of remote sensing has achieved remarkable results. The role of remote sensing monitoring in pollution prevention, supervision and law enforcement, ecological protection, environmental emergency response, and nuclear safety supervision is further highlighted. In 2014, more than 40 drone flight inspections were conducted on air pollution sources in 19 key industrial clusters in Beijing, Tianjin, and surrounding areas. Some dredging problems were discovered, and the company's pollution-stealing behavior was cracked down and shocked. In addition, in 2014, through continuously consolidating the work base and continuously strengthening monitoring quality management, the national environmental monitoring capability was further enhanced, the credibility of monitoring data was effectively guaranteed, and routine and special monitoring work was further deepened.
In planning the “13th Five-Year Plan†monitoring development, Wu Xiaoqing pointed out that the “Thirteenth Five-Year Plan†should integrate and optimize environmental monitoring networks based on the needs of the three major action plans for the atmosphere, water, and soil, and continuously strengthen pollution source monitoring and environmental emergency response. With early-warning monitoring, we continued to promote the monitoring of environmental remote sensing and ground ecological environment, and continuously strengthened monitoring quality management and information disclosure. We will focus on the following tasks: First, we must comprehensively strengthen the top-level design of environmental monitoring, conscientiously implement the "Environmental Protection Law," vigorously promote the reform of the environmental monitoring and early-warning system, and complete the preparation of environmental monitoring "13th Five-Year" development plan. The second is to effectively improve the water environment monitoring and early warning capabilities and optimize the integration of the water environment monitoring network, so that the country's water environment monitoring and early warning capabilities will reach a new level. The third is to continue to strengthen the construction of heavy pollution weather monitoring and early warning systems and the analysis of sources of particulate matter. Before the end of October, all provinces (autonomous regions, municipalities), provincial capital cities, and cities with separate cities planned to build air quality forecasting and early warning systems; by the end of November, the preparation of source emission lists for 13 pilot cities including Beijing, Tianjin, and Shanghai will be completed; before the end of the year, Basically completed the second phase of 26 key cities source analysis work. The fourth is to consolidate and enhance monitoring of pollution sources, self-monitoring, and disclosure of information. To further improve monitoring of pollution sources and improve the use of data, we must, in accordance with the relevant provisions of the new "Environmental Protection Law," supervise and urge state-owned key enterprises to conduct self-monitoring in accordance with relevant regulations and openly monitor information to the public. Fifth, continue to strengthen soil, rural and other special monitoring work. Complete the national soil environmental quality monitoring network construction, and gradually improve the soil environmental monitoring and evaluation technology system and standards and specifications, and further improve the rural environmental quality assessment technology methods. Sixth, strengthen the environmental monitoring quality management work. Three types of cross-checks, flight inspections, and retrospective inspections were conducted to carry out special inspections of air quality monitoring data across the country. The inspection results were reported to the public and those responsible for the problems were punished according to the law. Seventh, we will continue to strengthen the monitoring of environmental remote sensing and advance the process of “integration of heaven and earthâ€. This year we will vigorously promote the establishment and development of two satellites for atmospheric environment monitoring and the follow-up satellites for two 16-meter-resolution environmental satellites, strengthen the environmental monitoring capabilities of UAVs, and continuously deepen the development of environmental remote sensing technologies in pollution prevention, ecological protection, and environmental monitoring and enforcement. Monitoring applications in other areas, promote the construction of ecological protection red line remote sensing supervision platform. Eighth, we will continue to strengthen the construction of environmental monitoring system.
Overview of the UTECH CO2 Laser Cutter
Product Description:
CO2 Laser Engraver is special for some vertical materials, it mainly used in the vertical tomb industry, this machine can be fixed onto the tomb for some engraving work, also can do some normal cutting and engraving work.Applicable materials:
Rubber, Marble, granite, jeans, fabric, acrylic, MDF, wood, bamboo, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass and other non-metal materials, etc.
Applicable industries:
Advertisement, gift, shoes, toys, computers, garments, model cutting, building, packaging, paper industry, etc.
Advantages of UTECH Laser Cutting Machine:
1. Ball screw transmission
Compared with belt transmission , high precision with fast speed.
2. Stepper motor and river
Standard machine equipped with stepper motor and driver, also can choose hybrid or other servo motor and driver.
3. Ruida 6332M control system Controller
1) Original new version Ruida 6332M control system, support DSP control.
2) High speed USB data transmission interface, download speed is up to 500kb/s
3) The control panel has 12 language for optional,such as Chinese,English,French, Portuguese, Spanish, Russian, German, Korean,Japanese and so on.
4) It supports multiple graphic formats, such as PLT / DXF / BMP / JPG / GIF / PGN / TIF and so on.
5) This machine is equipped with Control System for CorelDraw/AutoCAD and other advance software.
6) Very easy-operating control board and you can also see the engraving path from the control board.
4. Professional Laser headJust one year time,we have improve the laser head three times ,many factory is still use the first
or second one.
At present the latest generation is the most perfect of laser head, compared to the previous two generations, it has many advantages ,such as higher precision, better stability,more convenient to adjust.
And it is also the most popular design for customers.
5. Co2 Laser Tube ( Original Reci laser tube , Best brand in china )
Using life :8000-10000 hours
Global Warranty 12 months
6. Bracket of co2 laser tube
We not only use the best brand laser tube, in order to make the laser tube to play the best results ,for the auxiliary components ,we have also made constantly improvements, such as laser tube bracket, lens bracket, etc.
7. Laser supplier matched with the laser tube
Laser power supplier installed Independent , compared with the general install together with other Electrical Equipment, it can reduce interference of other
Electrical Equipment this can ensure the better performance of the laser power.
8. 550W exhaust fan
9. Water pump or Water chiller CW3000/5000/5200
To Cool Laser tube and Longer the lifetime of Laser tube.
Supporting upgradation to CW6000 with extra payment.
Package:
Every machine is packed with great care and tough material.
It is packed with cling films first and then film bags.
At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottom.
With this kind machine, all our Laser Machine can protect well during long trip by sea or by train.
We can transport machine by boat or by training, according to your requirement.
<
Model
UTECH Laser cutting machine
Working area
1300*900mm/1300mmx2500mm, etc
Laser Types
Seal CO2 LaserTube
Laser power
130W/150W/180W/260W
Engraving speed
100-600mm/s
Cutting speed
0-30mm/s
Location precision
≤0.01mm
Resetting positioning accuracy
0.01mm
Power supply
AC110- 220V/50-60HZ
Controlling software
RDCAM
Operating temperature
0 - 45°
Operating humidity
5-95%
Minimum shaping character
English 1 x 1mm
360°slope engrave
Yes
Driving system
Stepper
Cooling mode
Water-cooling and protection system
Auxiliary Devices
Exhauster and the Exhaust Pipe
Software
RDCAM V6.0
Graphic format supported
BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DWG,etc
Optional
Atuomatic feeding system, rotary axis, auto-focus
Laser Cutting Machine
Laser Cutting Machine,Laser Cutter,Mini Laser Cutting Machine,Co2 Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , http://www.fiberlasers.de