Bosch Müller's first factory in China officially opened

Bosch Mahle Turbo Systems is dedicated to satisfying the growing domestic market demand for highly efficient turbocharged gasoline engines . On November 25, 2014, the company’s first factory in China was officially opened in Shanghai, China. The factory will produce high-quality turbocharged systems for the local market.

Bosch Müller Turbo Systems Factory opens

The new plant is also the headquarters of Bosch Malar Turbo Systems (Shanghai) Co., Ltd. in China. It is a wholly-owned subsidiary of Bosch Maler Turbo Systems Co., Ltd. in China. In addition, a research and development center for turbocharger system technology is also located, and engineers and technicians will be equipped with advanced research and development equipment such as engine test benches, laboratory equipment, and high-temperature gas test benches. The Bosch Müller Turbo Systems factory in St. Michael, Austria, is modeled after the plant is equipped with a variety of sophisticated instruments and equipment, and can achieve an efficient simultaneous production process. All employees of the new plant have undergone rigorous training at the main plants in Austria and Germany, ensuring excellent product quality.

Chen Yudong, President of Bosch (China) Investment Co., Ltd.

With a highly modern production line and a team of local experts, Bosch Müller Turbo Systems will provide high quality products and technologies for the Chinese market. Particularly worth mentioning is the "End-of-Line Test" during the turbocharger assembly process. It can be used to determine the turbocharger functionality, internal and external seals, and whether the assembly is correct or not. Possible balance differences are checked. The plant is designed to produce about two million turbochargers per year. In addition, Bosch Müller Turbo Systems will also provide Chinese customers with comprehensive services: To ensure the best customer service, the company has set up quality assurance, marketing, data simulation, product design, engineering applications and technical verification. Various professional teams within.

Exhaust turbocharger

The factory is located in the factory area of ​​Mahler's Shanghai. At the beginning, the new plant covers an area of ​​approximately 5,000 square meters and is mainly used for the manufacture of turbocharger products for gasoline engines in the Chinese domestic market. At present, the company has won orders from a number of local and international automakers.

About Bosch Maler Turbo Systems

The Bosch Müller Turbocharging System is a joint venture between Bosch and Mahler. The company has accumulated years of expertise in internal combustion engine technology, excellent research and development capabilities, and large-scale production capacity of high-quality engine components. This joint venture established in 2008 by Robert Bosch GmbH and Mahler GmbH has a total of approximately 500 employees in Stuttgart and Breisach, Austria, St. Michael, Austria, and Shanghai, China.

Main Parameter:

(1)Lifetime:

Under certain loads, bearing in the number or number of hours before pitting, known as bearing life. The life of rolling bearings in revolutions (or speed of work under a certain number of hours) definition: bearing within this life, in any of its bearing ring or a rolling body occurred on the initial fatigue damage (peeling or defects). However, whether in the laboratory or in actual use, can be clearly seen, the appearance of the same bearing under the same working conditions, the actual life is not the same. In addition to several different definitions of bearings "life", one of the so-called "working life", it said the actual life of a bearing can be reached in before damage is composed of wear, damage is usually caused not by fatigue, but by abrasion, corrosion, damage and other reasons. In order to determine the seal bearing life standard, the bearing life and reliability Link. Because of differences in manufacturing precision, uniformity of material, even the same material, the same batch of bearings of the same size, under the same working conditions, the length of life is not the same. If the statistical life of 1 units, is the longest life expectancy of 4 units, the shortest 0.1-0.2 units, the longest and the shortest life is 20-40 times of.90% bearing does not produce the number of revolutions of pitting, or hour experience called rated life bearing.

 

(2)Dynamic load rating:

For the bearing capacity comparison of bearing anti pitting, provisions of the rated life of a bearing one million , the maximum load can withstand the basic dynamic load rating, C said. It is bearing on the dynamic load rating of C under the action of the bearing one million without the occurrence of pitting failure reliability for 90% C, the greater the carrying capacity is higher. The basic rated dynamic load bearing 1. refers to the pure radial load 2. thrust ball bearing is 3. pure axial load radial thrust bearing is to produce pure radial displacement and radial component.

 

Category:

(1)Sleeve bearing:

Plain bearings, both inside and outside the ring, there is no rolling body, usually made of wear-resistant materials, often used in low speed, light load and filling lubricating oil and maintenance difficult mechanical rotating parts.

(2) Spherical plain bearing

The sliding contact surface of the joint bearing is spherical, which is mainly suitable for swinging motion, tilting movement and rotary motion.

(3) Antifriction bearing

Rolling bearing according to different load direction which can withstand or nominal contact angle for radial bearing and thrust bearing. The radial contact bearing for the nominal contact angle of 0 radial bearings, angular contact radial bearing for the nominal contact angle greater than 0 to 45. The radial bearing axial contact bearing for the nominal contact angle for thrust bearing 90, angular contact thrust bearing for the nominal contact angle is greater than 45 but less than 90 of the thrust bearing.

(4) Deep groove ball bearing

Deep groove ball bearings are the most representative. Compared to other types of bearings with the same size, this kind of bearing friction coefficient is small, extreme high speed, simple structure, low manufacturing cost, high precision, without frequent maintenance, and large size range, form, bearing is a kind of the most widely used. It mainly bear radial load, also can withstand the axial load. When the only bear radial load, the contact angle is zero.

(5) Self-aligning ball bearing

Self-aligning ball bearing is two groove of the inner ring and outer ring raceways between spherical and spherical ball bearing assembly. Outer ring raceway curvature center and bearing center line, so it has the same self-aligning ball bearing self-aligning function. In the axial deflection shell, can be automatically adjusted that is not to increase the burden bearing. The axial load of spherical roller bearings can bear radial load and two directions. Self-aligning ball bearing radial load capacity, suitable for heavy load, load impact. Inner diameter is tapered bore bearings can be installed directly. Or use the sleeve, remove the tube installed in the cylinder axis cage. Stamping steel cage, polyamide forming. Self-aligning ball bearing is designed to withstand heavy load and impact load, precision instruments, low noise motor, automobile, motorcycle, metallurgy, rolling mill, mine, petroleum, paper, cement, sugar etc. Industry and general machinery, etc.

(6) Linear bearing

Linear bearing is divided into linear bearing and linear bearing metal plastic. Metal linear bearing is a kind of linear motion system with low cost of production, for unlimited travel and with the use of cylindrical shaft. Because the ball bearing in point contact with the shaft, so the load is small. The ball rotation to low friction resistance, smooth movement so as to obtain high precision.

Bearing Parts

Bearing Parts,Spherical Bearing,Industrial Bearing,Stainless Steel Bearing Parts

VESTA Motoring Ltd , http://www.vesta-industry.com