Highly Automatic Steel Wire Straightening Cut to Length Machine Sales

Main parameter of Automatic rebar straightening and cutting machine

 brief introduction of Automatic rebar straightening and cutting machine(Hydraulic)

The wire cutting and straightening machine is used to straightening wire or rebar,
 and then cut it into the needed length. It can do a prepare work for the wire mesh welding machine. 

a,This machine adopts Weft Wire Position Device .It could fix weft wire exactly on position ,
which is easy to operate with simple structure .

b,There is a closed straighten and inputing system for weft wire .Warranty weft wire was input and 
straightened continuously .,

c,Weft wire Stop Device .This device could stop the machine working when weft wire is finished or cut ,
avoid damage without wires.

d,This machine not only could produce a wide mesh ,but also could produce two narrow meshes
 at the same time as your requirement.

e,Electrode adopts chrome ,zirconium ,copper as material ,enjoying long -lived service.

Features of Automatic rebar straightening and cutting machine(Hydraulic)

a. Fast in straightening and cutting: Speed: 110m/min

b. Accurate measurement:≤±1mm

c. low failure rate: work with high performance for a long time under normal condition after debugging 

d. Precise straightening : the straightness of straightening wire is ≤±1mm

e. Arrangement of the wire : Min is 1mm, Max. is 16mm 

After-sales service
1.Maintenance period: one year
2.Training how to install the machine, training how to use the machine.
3.Engineers available to service machinery overseas.
4.Test the machine before shipment
5.Provide technical guidance relate to use the machine
6.Provide the spare parts at cost price after warranty period
7. Collect the feedback for the machine working 

If you are interested in this products,please contact me!

Name:Hannah

 

Tel//:008618032888739

 

 

1. Introduction of Waste Lube Oil Distillation Plant

Waste Lube Oil Distillation Plant ,is the new technology which can refine the waste lube oil into base oil(which can be made into diesel and gasoline after processed by our catalyst). The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.

 

2. Raw material which can be used

    a. Waste oil .example: waste diesel, waste oil residue etc.

    b. tire/rubber oil

    c. plastic oil

    d. crude oil

e. waste engine oil

f. waste motor oil

g. waste lube oil

h. waste transformer oil

i. underground oil

3. Models of waste lube oil distillation plant

 4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste lube oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.

 

 5. Waste Lube Oil Distillation Plant Exporting Experience:

America:	Brazil, Canada, Colombia, USA,
Middle East:	Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:	Albania , Bosnia and Herzegovina
Asia:	Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:	Ghana, Mozambique, Zambia

 

Waste Lube Oil Distillation Plant

Waste Lube Oil Distillation Plant,Continuous Lube Oil Distillation Plant,Lube Oil Recycling Plant,Essential Oil Refinery Plant

Shangqiu Sihai Energy Technology Co., Ltd , http://www.sihaienergy.com