Shanghai Institute of Optoelectronics made significant progress in the new concept study of free electron lasers

[China Instrument Network Instrument Development] Shanghai Institute of Optics and Lasers State Key Laboratory of Laser Physics Xu Zhizhan, Li Ruxin, Liu Jiansheng, etc. made significant original progress in the development of ultra-short and ultrashort laser-driven miniaturized free electron lasers. A miniature, transient undulator solution. The researchers used super-ultra-short lasers to interact with metal wires to generate high-energy electron beams and subtly use the charge separation effect to construct miniature, transient electron undulators, and obtained nonlinearities based on the new undulator solution. Amplified strong THz radiation output. This latest research result was published online in Nature Photonics.

Femtosecond laser-driven wire waveguide spiral undulator for high THz radiation system diagram
Free electron laser is known as the fourth generation light source and can provide high brightness coherent radiation from far infrared to X-ray. It has unprecedented revolutionary application value in fields such as physics, chemistry, materials science and life science. Traditional free electron lasers generate high-energy electron beams based on radio frequency accelerators, and then use an undulator composed of periodically arranged magnets to perform torsion and modulation of the electron beams, and finally emit high-intensity coherent radiation. Whether it is a radio frequency electron accelerator or an electronic undulator composed of periodic magnets, it is bulky and expensive. The development of a compact, low-cost new generation of free electron lasers, including table-top electron accelerators and undulators, is a major goal that the scientific community has been dreaming of chasing.
The State Key Laboratory of Laser Physics of the Shanghai Institute of Optics and Lasers has been making unremitting efforts to explore new principles and new concepts in the development of super-ultra-short laser driven table-top high-energy electron accelerators and undulators. Following the major achievement of a record high-brightness, high-quality electron beam in the electron acceleration of a super-ultra-short laser driven laser wake field in 2016, the research team has developed a new miniature, transient undulator driven by a super-ultra-short laser. In terms of conceptual research, we have made significant and original breakthroughs. For the first time, we have successfully built an all-optically driven wire waveguide spiral undulator and achieved a strong THz radiation output. In this work, the researchers used a beam of super-ultra-short laser to irradiate the metal wire target, and the directional high-energy electron emission was generated by the interaction between the laser and the plasma. At the same time, a very strong moment was generated on the wire based on the charge separation. Radial transient electric field; the electric field guides a large amount of high-energy electrons emitted along the direction of the wire to travel along the wire and perform a periodic spiral motion-corresponding to the spiral motion of the electron beam in a micro undulator. This movement produces strong THz radiation with conversion efficiency of more than 1%. In the experiment, the electron beam energy is ~100 keV, and the transient undulator period is about 650 micrometers. By changing the diameter of the wire, the radial electric field intensity can be changed, thereby changing the undulator period, and obtaining a frequency-tunable near-period broadband THz radiation. By changing the length of the wire, the non-linear amplification effect of the THz radiation intensity with the transmission distance was first observed, and the magnification was more than 10 times. This strong THz radiation source is expected to gain important applications in the detection of materials. In this study, both the electron beam and the undulator were produced by the same laser beam. The new concept of this undulator is expected to be further expanded and has been applied in short wavelength and even X-ray free electron lasers.
In this study, Liu Weiwei and others from Nankai University provided advanced testing equipment for the measurement of THz radiation and conducted related experiments in cooperation.
(Original Title: Shanghai Institute of Optics and Engineering, Ultra-Strong Laser-Driven Miniaturized Free Electron Laser New Concept Research Has Made Significant Original Progress)


Ratchet Cable Cutter:   

The main material of the product is carbon steel.

The handle of the product is telescopic.

The design of the handle is hard and light.

Packing: Ratchet Cable Cutterpacked by carton or as your request.

Applications: Electric power industry,Mommunication industry,Mhip-building industry,Metaluraical industry.

Features:

1. Cutting easily with forging blade and long lifetime

2. Not for cutting steel or steel wire

3. With safety lock

4. Cutting Range:240mm² max.

different types of ratchet cable cutter 

 Ratchet Cable Cutter Different specifications as below:


Ratchet cable cutter

Model

Size

Weight

J12

345(514)*125*46mm

1.95kg

J30

405(514)*160*64mm

3.6kg

J13

345(514)*125*46mm

1.95kg

J25

745*135*50mm

3.45kg

J50

400(570)*158*52mm

3.2kg

J40

260*100*35mm

1.15kg

J40A

245*135*42mm

1.05kg

J40B

250*95*30mm

0.65kg

J75

420*205*50mm

3.6kg

J95

818*265*50mm

5.43kg

J100

490*270*50mm

6.4kg

J130

500*300*50mm

8.1kg

J160

500*300*50mm

8.11kg

Ratchet Cable Cutter Details:Ratchet Cable Cutter Details








Ratchet Cable Cutter

Ratchet Cable Cutter,Cable Cutters,Ratchet Cutters,Ratchet Wire Cutters

Hebei Long Zhuo Trade Co., Ltd. , https://www.hblongzhuo.com

Posted on