Machine vision-based automatic detection of gas meter is officially put into use

[China Instrument Network Instrument Industry] According to the Zhejiang Institute of Measurement, "a machine vision-based automatic detection of gas meter function test device," research and development of test equipment has been put into use in the enterprise.

In recent years, the Zhejiang Metrology Institute has been tracking the "machine-for-agent" cutting-edge technology. In order to do a good job in innovation, the Metrology Institute has made several on-the-spot investigations to many well-known companies such as Nazhi Fujitsu Robot Co., Ltd. and Zhejiang Guozi Robotics Co., Ltd. The feasibility study of intelligent technology and related projects has made substantial progress in the exploration of robotics and automatic detection applications.

The automatic detection of the gas meter function that was formally put into use is the use of machine vision technology to realize the function of automatically identifying the dial data of the gas meter. The detection device combines the identification of the company's gas meter models, low-voltage function detection, card-card detection, ventilation count, power-off protection, write-in table number, etc. with automatic control, and integrates mechanical electronics, pneumatic control, and multiple technologies for the Internet of Things. In one, the time for the gas meter to run on the assembly line is shortened, and the detection time for a single gas meter is only 150 seconds, and the original 8 inspection stations are responsible for the efficiency of each person to 24 inspection stations per person, improving the detection efficiency. Saving labor costs. The project has developed a gas meter automatic production line and its supporting measurement and inspection device, which was jointly completed by the Zhejiang Provincial Metrology Institute and a well-known gas company.

All along, the Zhejiang Institute of Metrology devotes itself to serving the intelligent development of the “Made in Zhejiang” industry. It has carried out many researches and explorations in the field of automatic detection. In addition to the automatic detection and production line for gas meters, “multi-station scales based on robot technology The "Study of Intelligent Verification System" project has also been approved and the project is progressing smoothly. After the project is successfully developed, it will realize the automatic verification of high-precision electronic balances and innovate the field of metrology and calibration in China.

HWS Anti-corrosion Pipeline Heat Shrink Sleeve

Product Introduction:
HWS Anti-corrosion Pipeline Heat Shrink Sleeve is also known as heat shrink weld belt/Heat shrinkable weld sleeve (belt), made by irradiation cross-linked polyolefin base material and special sealing hot melt adhesive. WHR Three Layers Heat Shrink Sleeve For Anti-corrosion it has high mechanical strength, stable performance, aging resistance, anti chemical corrosion, sealing, strong adhesive strength, easy to operate, etc.
 
Product Application:
 

a) Pipeline Engineering Tubing Apply to petroleum, nature gas, chemical engineering, fuel gas and others project pipeline network for anti-corrosion of steel pipeline repaired and welded junction.And also apply to corrosion resistant coating for repairing the breakage.
b) Apply to 2PE, 3PE, FBE,PP,CTE anti-corrosion coating pipeline for anti-corrosion of welded junction and bend area.
 
Specification:
When using the heat shrink sleeves, first preheat the pipeline up to 55 degrees Celsius~60 degrees Celsius, and then wrap the joint belt around the treated pipeline with the heat shrink joint belt, make sure that the heat shrink joint belt lap width is more than 50mm, it will shrink at radial direction when the heat effects on it, at the same time the hot melt adhesive start to melt, fill and cover the surface of the pipeline, form continuous and close anti-corrosion system with original pipeline anti-corrosion coating.

Executive Standard: SY/T0413-2002 and SY/T4054-2003 and GB-T23257-2009.
 
Features & Benefits
a) excellent adhesion ability, adhesion range is wide: can adhere with steel, PE, epoxy coating, etc.
b) strong in corrosion resistance:can effectively block a variety of medium permeability and corrosion, aging resistance, environment stress cracking resistance, resistance to UV irradiation.
c) High mechanical strength: compression resistance, shock resistance, shear resistance.
d) Wide use range: can instruct at -25~35 degrees Celsius temperature range.
e) No volatilization, safety in use, can save energy, can protect environment
f) Long service life.
g) Shrink fast, easy to operate, simple to install.
h) low preheat temperature: when preheat -55~60 degrees Celsius, can install it to shrink.

 Other size can customized according to customers' request.

Pipeline Engineering Tubing/sleeves

Pipeline Engineering Tubing,Pipeline Insulation Tape,Heat Shrink Polyethylene,Polyethylene Terephthalate Tubing

KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com