1 Cavity Thin Wall Mould of Plastic Thin Wall Bowl

Welcome to our website


Jtp Mould is known as one of the best manufacturers and exporters for plastic injection moulds for household articles, chair mould, pallet mould, crate mould, automotive mould and so on. Our moulds are mainly exported to Italy, Australia, Saudi, Arabia, Jordan, Argentina, Colombia, India, Malaysia, Philippines and other 20 countries.


1. More detailed about 1 cavity thin wall mould of plastic thin wall bowl
Name                                    1 cavity thin wall mould of plastic thin wall bowl
Mould material                     718 2738 S136 etc
Cavity                                    1 cavity
Runner                                 hot runner
Mould design                     3D/2D
Design days                        1 day
Mould life                             1 million shots
Plastic material                    PP PS AS etc.
Injection system                   pin point gate
Payment                                  40% of deposit by L/C T/T 60% of balance by L/C T/T
Delivery time                          50-60 days
Specification                           Depends on customers' demand


2. Why thin wall containers are so difficult to molding?
Generally, during injection molding, thin wall container easy to appear uneven wall thickness and as the wall thickness is too thin, it needs high speed and high pressure injection, so the machine should be bigger than machine for general product, it is not because of its mould size is bigger or it needs big injection weight, it just because it needs high injection pressure, so the clamping force should be big.


3. Why we can product good plastic thin wall moulds?
As for thin wall product moulds, the dimension of the moulds should be controlled precision. For such products, we always use high speed milling machine and some other high precision tooling machine to make it, the tolerance should be controlled in 0.02mm. Regarding the ejection system, we usually use air to blow first, then the container will not stick to the core and then use double ejector plates drived by hydraulic cylinders to ejector the product off the mould. As the container is too thin, so we generally don't use ejector pins, because ejector pin will easy lead to deformation.

Cooling system is also very important to such thin wall product, just as I stated above, for such product molding, it needs high speed and high pressure. So the mould temperature will be high, it is very important to control the mould in low temperature, so we should add water channel as more as possible, and it should be near the product surface. Besides, we always adapt with BeCu to help the mould cooling, because BeCu has good thermal conductivity. Even though, the price will be much high than mould without BeCu, but the good cooling will help make the product very beautiful.

High strength buckle machine

Performance: flexible, fast, lightweight and easy to carry.

Features: It is suitable for conveyor belts of various specifications and has strong adaptability to the operating environment.

Technology: The rocker cam structure is adopted to increase the arm force and the transmission mechanism is high. The whole machine can be easily disassembled into two parts of the head frame.

Quality: The upper and lower bending nail materials are made of special mold steel such as Cr15 and Cr12. The quality of the binding is good, the misplacement rate is low, and the service life is long.

Strap Clinching Machine

Clinching Machine,Strap Clinching Machine,Hydraulic Clinching Machine,Stainless Steel Clinching Machine

Huozhou Coal and Electricity Group Bailong Industry and Trade Co., Ltd. , https://www.hltransportbeltbuckle.com