Welded Wire Mesh Fence Panel Machine

Fully Automatic Pneumatic Wire Mesh Machine(GWC-2500-Q)


Performance characteristics: 


New CNC automatic welding machine with nc synchronous control technique, welding time and control welding time of digital programming system by PLC, touch screen or keyboard input panel for two, more intelligent operation, rationalization. Fence welding machine using a pressure, welding points in time, the control of the biggest advantage is: Can appear on the same net between warp and weft more than 30 different mesh size. Welding using new efficient water-cooling welding transformer, and expand the scope of welding wire diameter. Easy operation, high flexibility, production is several times of artificial single spot welding machine. 


Performance characteristics: 

Cross Wire Feeding Unit(pre-cut)


it is installed on the upper of the mesh grid set device.it consists of walking platform,cross wire stacking unit,wire distrbution device and wire feeding device.
The distribution device and the wire feeding are driven by pneumatic system under the operation by electrical control system.
Automatic cross wire feeding without the need for manual labor. it is designed for the cross wire is fed from pre-cut wire


Welding System

Welded system is made up of the rack,welding transformer,pressurized cylinder,upper electrode combination,lower electrode combination,cross wire magnetic locator,lift mesh unit,line wire bracket combination,pneumatic system,water cooling system and others spare parts.
Welding materal:cold rolled wire,cold rolled round wire,hot rolled wire.


Mesh Pull Out System

it consists of blanking plate,gantry,chain link mesh netting machine and convey car(or roller guide),the flipper(stacker-turner)is optional part.
Max length of wire mesh:6000mm.


CNC Mesh Position Unit

Mesh position unit usage is feed forward the welding mesh,at the same time ensure the line wire spacing in need,which adjust cross line spacing according to the automatic setting.
CNC mesh position system can adjust the cross wire spacing automatically,and can save the data in the system, it is easy,convenient and accuracy to adjust the cross wire spacing.


Line Wire Straightening Table

16 set straightening units for line wire.(based on the mesh width is 2400mm,mesh opening is 150*150mm).
May change the line wire diameters without replacing straightening rolls.



The main technical parameters



In order to give you one accurate quotation sheet,please supply us more of your requirements as below:
 
1.wire diameter range(3-5mm or 4-8mm).
2.mesh width(2000mm,2500mm,3000mm).
3.mesh opening size(50mm,100mm,200mm,300mm).
4.mesh length(According to your needs).
5.industrial votalge/frequency(The standard is 380V 50HZ).
 
 
If you have any interest in wire mesh fence panel welding machine or other wire mesh machine products,please feel free to contact with us.

Manual Saw Blade Pipe Cutting Machine

1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.

Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com