Professional Supply Vacuum Fecal Suction Truck/ Sewage Suction Truck with 12000L Tank

Part 1: The structure of sewage suction truck 
1.Chassis :
a.Drive type: 4x2,4x4,6x2,6x4,6x6,8x4 etc.
b.Our factory has good business relationship with FAW,SINOTRUCK ,DONGFENG     ,SHACMAN,JAC.JMC,FOTON,ISUZU,etc.
2.Tanker body:From 2m3 to 25 m3 capacity 
3.Accessory of sewage suction factions:Equipped with PTO, transmission shaft, vacuum suction sewage pump, high pressure molding tank, moisture separator, gas-oil separation, multiple directional control valve, hanger rod, self-discharging valve, suck fecal gun and pipe network system.


Part 2 : Dongfeng 12000L vacuum sewage suction truck

Part 3: Our factory introduction and main products 
HUBEI VELDLION MACHINERY CO., Ltd is an authorized forklift manufacturer.We are specialized in the production of a variety of special-purpose vehicles.
Creating value for our customers is our company's concept. Welcome to enquiry from us, Let's our sales team make you more great in this field.
Our main products:
1. LPG tank & truck % trailer
2. Fire engine truck 
3. Truck mounted with crane 
4. Heavy duty truck, dump truck 
5. Water truck, 
6. Fuel tanker, 
7. Van truck, insulated truck, refrigeration truck 
8. Fecal suction truck, sewage suction truck, 
9. Concrete mixer truck,
10. High-altitude operation truck, 
11. Self-loading garbage truck, garbage compactor truck, sealed garbage truck, 
12. Bulk cement truck,

Part 4: Our service 
(1) More than 300 workers ,large and advanced production; 
(2) Have professional engineer,can offer the best solutions;
(3) With keeping good relation with Sinotruk, FOTON, ISUZU, DFAC, FOTON, SHACMAN chassis factory.
(4) Build strict QC team to guarantee the quality;
(5) Own good sales team, can offer warm follow-up service.

Part 5: Contact us  
Atten: Lotus Wong
Tel: 0086-135 5436 0907
www.veldlion.com Part 1: The structure of sewage suction truck 
1.Chassis :
a.Drive type: 4x2,4x4,6x2,6x4,6x6,8x4 etc.
b.Our factory has good business relationship with FAW,SINOTRUCK ,DONGFENG     ,SHACMAN,JAC.JMC,FOTON,ISUZU,etc.
2.Tanker body:From 2m3 to 25 m3 capacity 
3.Accessory of sewage suction factions:Equipped with PTO, transmission shaft, vacuum suction sewage pump, high pressure molding tank, moisture separator, gas-oil separation, multiple directional control valve, hanger rod, self-discharging valve, suck fecal gun and pipe network system.


Part 2 : Dongfeng 12000L vacuum sewage suction truck

Part 3: Our factory introduction and main products 
HUBEI VELDLION MACHINERY CO., Ltd is an authorized forklift manufacturer.We are specialized in the production of a variety of special-purpose vehicles.
Creating value for our customers is our company's concept. Welcome to enquiry from us, Let's our sales team make you more great in this field.
Our main products:
1. LPG tank & truck % trailer
2. Fire engine truck 
3. Truck mounted with crane 
4. Heavy duty truck, dump truck 
5. Water truck, 
6. Fuel tanker, 
7. Van truck, insulated truck, refrigeration truck 
8. Fecal suction truck, sewage suction truck, 
9. Concrete mixer truck,
10. High-altitude operation truck, 
11. Self-loading garbage truck, garbage compactor truck, sealed garbage truck, 
12. Bulk cement truck,

Part 4: Our service 
(1) More than 300 workers ,large and advanced production; 
(2) Have professional engineer,can offer the best solutions;
(3) With keeping good relation with Sinotruk, FOTON, ISUZU, DFAC, FOTON, SHACMAN chassis factory.
(4) Build strict QC team to guarantee the quality;
(5) Own good sales team, can offer warm follow-up service.

Part 5: Contact us  
Atten: Lotus Wong
Tel: 0086-135 5436 0907
www.veldlion.com

PET & PVC Special Injection Molding Machine

1. PVC special screw with high performance hard chromium plating or with stainless dteel 

2. Widen the safely door( Optional)

3. Equipped with two or more core pulling device 

4. Multi stage of air cool device on barrel for precise control of material temperature

5. Large torque plasticizing hydraulic motor

AOTAI Servo Driving System

1. Show High Precision:The accurate injection positioning,pressure, speed ang pressure maintaining, to ensure the ensure the repeatability error of injection accuracy less than 0.3%to achieve precision molding.

2. Super Energy-Saving Features:Compared with standard injection machine, the energy saving rate can reach 40%-70% for the same plastic production.

3. High Efficiency:Compated with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by 18%

4. High Respomse System:The system acceleration and deceleration performance is quite agile and force &speed regulation is very sensitive. The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.

5. Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.

6. Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation. Improve the operation performance,promote using efficiency and save a large quantity of coolong water.

 

J system characteristic

Design and reseatch on high energy-saving Injection Molding Machine has been regarder as our National Torch Plan and we are the earliest company who is engaged in this project. Servo motor can disctate different machine action according to product workmanship requirement. To inqut data into the controller and instruct different workload demand of every machine action quickly. The linearity of servo driving system operational process keeps good tracking with workmanship instrucion. In this case, the system pressure and flow becomes a closed loop, which achieves high machine performance & high energy-saving by 40%-70%. With this high-response system, the efficency of machine can be more than 98%.

 

High combination device

1. Imported brand controller

Imported options: mainly KEBA and B&R,Display the concept of high response & multfunction people-oriented control

2. CE standard system & series

hybrid system & machine series, which is honored with CE certificate, to improve the safety rate during machine operation

3. Overlap movement high speed system

Ejection or plasticizing when mold opening & clamping, to increase machine cycle and achieve high efficiency

4. High efficiency non-standard power/capacity expansion systm

Add driving function on standard machine power, so to increase operation cycle obviously & achieve super quality and high efficiency.

5. High speed acceleration/accumulator unit

Suitable for the production of thin-wall& fast molding products, so to meet the processing requirements of precision & high difficulty products

6. High precision injection unit pressure sensor device

Improve system pressure real time cycle during injection unit operation, so to realize the closed-loop effect of injection/holding pressure and pre-plasticizing & back pressure

7. High precision injection servo valve/closed-loop device

Applicable to processing requirements of extremely precision high end products, so to increase injection repeat accuracy efficiently

8. Single cylinder fast injection device

Appropriate for 360T(or below) machine is clamping unit to match single cylinder high injection molding, so to ensure the production of ultrathin-wall products ,and realize super quality and high efficiency.

9. Optimum function combination of clamping & injection

Suitable for the pertinent special products by nonstandard and optimum customized combination of clamping unit & injection unit machine, so to reach most suitable application of optimum mass production.

PET Special Injection Molding Machine

Pvc Pipe Making Machine,Pet Injection Molding Machine,Automatic Pet Preform Injection Machine,Pvc Injection Molding Machinery

NINGBO BEILUN ALLWAY MACHINERY CO., LTD. , http://www.aotai-machinery.com