Machine advantage
PC recycling granulation pelletizing machine has many advantages, which focus on feeding system, driving parts, transmission parts,screw RPM, screw desigin, barrel composition, electrical control system, pelletizing system. Such as:
1. Feeding system: We have developed the volumetric feeder and continuous gravimetric automatic feeding system. On volumetric feeder system, we sue new design type feeder which avoid the powder leakage shortage; The gravimetric feeder adopts Siemens PLC and International barnd load cells, through PROFIBUS to achieve close-loop control, so that it increase the accuracy of feeding, also realized the industry automation.
2. Driving parts: We use best brand motor, AC or DC are both available. Also ABB or Siemens motor as optional.
3. Transmission System: our gearbox is used tri-axis structure, which combine reductina nd torque distribution gotether. All bearing is NSK or SKF. Or you can deside by yourself
4. Screw rotating speed: current, we have standar twin screw extruder from 400-600RPM, we will suggest customer to use suitable RPM extruder according processing material
5. Screw combination: All screw parts are all segments parts, the L/D can be from 28-60, Customer can easy to change to screw design to meet different polymer processing, so that we can use one machine for different purpose process, the screw parts are made of high-speed tool steel, also wieth so many years experience, we designed different tyep kneading elements, mixing elements, gear disk etc.
More advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 80kg/h, we can do the machine up to 1000kg/h
5. The machine wih long life.
Machine parameter
1.Screw diameter:Ф62.44       2.Internal diameter of barrel:Ф63
3.Center distance:52 Â Â Â Â Â Â Â Â 4.L/D:40:1Â Â Â Â Â Â Â Â Â Â Â
5.Motor power:75kW              6.Rotary speed:500rpm     Â
7.Feeding method: single-screw feeder   Â
8.Cooling method:Force water cooling
9.Lubrication way:Oil dipping
10.Heating method:cast aluminum and cast copper  Â
11.Palletizing method: cooling pulls strip granulation  Â
12.Diameter of the pellet:φ2         Â
13.Speed controller:Britain EURO digital speed governor
other type of these kinds of machine
Model |
TSSK20 |
TSSK30 |
TSSK35 |
TSSK50 |
TSSK65 |
TSSK72 |
TSSK92 |
Screw diameter(mm) |
21.7 |
30 |
35.6 |
50.5 |
62.4 |
71.2 |
91 |
Rotary speed(rpm) |
600 |
400 |
400/600 |
500/600 |
400/500 |
400/500 |
400/500 |
Main motor power(kw) |
4 |
11 |
11/15 |
37/45 |
55/75 |
90/110 |
220/250 |
L/D |
32-40 |
28-48 |
32-48 |
32-48 |
32-48 |
32-48 |
32-40 |
Capacity(kg/h) |
2-10 |
5-30 |
10-80 |
20-150 |
100-300 |
300-600 |
600-1000 |
More machine photoes
Material come out from the die
Screw element (different material the screw struct is different, we can design the screw element up to the raw material)
The machine machine
Final pellets
If you need  more details of this kind of machine kindly contact me, I can send you more detail photoes and  vedios.
1. We supply below necessary documents with the machine:
- Machine layout
- Electricity diagram
- Machine certificate
- General manual book/maintenance book
2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.
3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.
4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.
5. 24Hours service :Â Â Cell+86-13915707468
                            Â
Machine advantage
PC recycling granulation pelletizing machine has many advantages, which focus on feeding system, driving parts, transmission parts,screw RPM, screw desigin, barrel composition, electrical control system, pelletizing system. Such as:
1. Feeding system: We have developed the volumetric feeder and continuous gravimetric automatic feeding system. On volumetric feeder system, we sue new design type feeder which avoid the powder leakage shortage; The gravimetric feeder adopts Siemens PLC and International barnd load cells, through PROFIBUS to achieve close-loop control, so that it increase the accuracy of feeding, also realized the industry automation.
2. Driving parts: We use best brand motor, AC or DC are both available. Also ABB or Siemens motor as optional.
3. Transmission System: our gearbox is used tri-axis structure, which combine reductina nd torque distribution gotether. All bearing is NSK or SKF. Or you can deside by yourself
4. Screw rotating speed: current, we have standar twin screw extruder from 400-600RPM, we will suggest customer to use suitable RPM extruder according processing material
5. Screw combination: All screw parts are all segments parts, the L/D can be from 28-60, Customer can easy to change to screw design to meet different polymer processing, so that we can use one machine for different purpose process, the screw parts are made of high-speed tool steel, also wieth so many years experience, we designed different tyep kneading elements, mixing elements, gear disk etc.
More advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 80kg/h, we can do the machine up to 1000kg/h
5. The machine wih long life.
Machine parameter
1.Screw diameter:Ф62.44       2.Internal diameter of barrel:Ф63
3.Center distance:52 Â Â Â Â Â Â Â Â 4.L/D:40:1Â Â Â Â Â Â Â Â Â Â Â
5.Motor power:75kW              6.Rotary speed:500rpm     Â
7.Feeding method: single-screw feeder   Â
8.Cooling method:Force water cooling
9.Lubrication way:Oil dipping
10.Heating method:cast aluminum and cast copper  Â
11.Palletizing method: cooling pulls strip granulation  Â
12.Diameter of the pellet:φ2         Â
13.Speed controller:Britain EURO digital speed governor
other type of these kinds of machine
Model |
TSSK20 |
TSSK30 |
TSSK35 |
TSSK50 |
TSSK65 |
TSSK72 |
TSSK92 |
Screw diameter(mm) |
21.7 |
30 |
35.6 |
50.5 |
62.4 |
71.2 |
91 |
Rotary speed(rpm) |
600 |
400 |
400/600 |
500/600 |
400/500 |
400/500 |
400/500 |
Main motor power(kw) |
4 |
11 |
11/15 |
37/45 |
55/75 |
90/110 |
220/250 |
L/D |
32-40 |
28-48 |
32-48 |
32-48 |
32-48 |
32-48 |
32-40 |
Capacity(kg/h) |
2-10 |
5-30 |
10-80 |
20-150 |
100-300 |
300-600 |
600-1000 |
More machine photoes
Material come out from the die
Screw element (different material the screw struct is different, we can design the screw element up to the raw material)
The machine machine
Final pellets
If you need  more details of this kind of machine kindly contact me, I can send you more detail photoes and  vedios.
1. We supply below necessary documents with the machine:
- Machine layout
- Electricity diagram
- Machine certificate
- General manual book/maintenance book
2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.
3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.
4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.
5. 24Hours service :Â Â Cell+86-13915707468
                            Â
Plastic Pipe Vacuum Calibration Tank
The Molten Extrudate in The Extruder Is Drawn into The First Vacuum Chamber Through Calibration
The Vacuum Then Forces the Plastic Against the Calibration Tool While Cooling Its Surface Enough to Maintain Proper Dimensions. Cooling Water Enters the Chamber Through the Spray Bar.
The Calibrated Plastic Is Pulled Through a Second Vacuum Tank, Where It Is Cooled by Water Filling the Compartment. A Vacuum Can Be Applied to The Chamber to Help Maintain the Shape of The Plastic Product.
Depending On the Size of The Pipe, The Cooling System of The Vacuum Sizing Machine Can Be Cooled by Spray Cooling. Generally, Full Immersion Is Required When the Pipe Diameter Is Small, And Spray Cooling Is Appropriate When the Pipe Diameter Is Large.
After Cooling, The Plastic Product Passes Through the Final Chamber. The Rollers Help Guide the Plastic Through the Vacuum Setting Machine.
Plastic Vacuum Calibration Tank,Vacuum Tank,Plastic Pipe Calibrator
Zhangjiagang Polestar Machinery Co.,Ltd , https://www.polestarextruder.com