Oxygen Permeability Tester/Analytical Instruments/Gas Analyzer

Oxygen Permeability Tester/Analytical Instruments/Gas Analyzer
Application:

     TR-OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
Films: 
Plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.

Packages: 
Plastic, rubber, paper, paper-plastic composite, glass and metal packages, e.g. red wine bottles, blister, various plastic bottles, Coke bottles, peanut oil packages, Tetra Pak materials, vacuum bags, metal three-piece cans, plastic packages for cosmetic, soft tubes for toothpaste, jelly and yogurt cups.

Feature:

1.Coulometric sensor method
2.Patent technology
3.Film and package test
4.3 specimens test simultaneously and independently
5.One-button test, test automatically in whole process
6.Multiple test modes optional
7.Data curves display
8.Computer control 
9.Digital flow adjustment 
10.3 Chambers temperature sensor embedded in
11.Environment temperature and humidity sensor inside 
12.Chambers water bath technology 
13.Unit based on embedded system,24bit Δ-Σ AD 
14.Pressure, oxygen and  temperature overload protection 
15.Traceable reference film calibration
16.Supports DSM system (DSM, lab data management system)
Principles
Film:
The specimen is clamped between the upper and lower chamber, the upper chamber is purged by a oxygen stream, and the other side of specimen, lower chamber is purged by a stream of nitrogen, due to the effect of oxygen concentration gradient at two sides of the specimen, oxygen molecules will permeate through the specimen into the nitrogen side,  penetrated oxygen molecules will be carried to the coulometric sensor which generates the proportional signal, so oxygen transmission rate and permeability coefficient will be obtained by calculating the sensor signal.
Package:
The package is mounted on the lower chamber, the outside of the package is air or a pure oxygen stream, the inside of the package is purged by a nitrogen stream, oxygen will permeate through the wall into the inside of the package, penetrated oxygen molecules will be carried to the coulometric sensor which generates the proportional signal, so oxygen transmission rate will be obtained by calculating the sensor signal.

Specification:
Test range:
         Film:  0.01-6500 cm³/m²Â·d (Standard)     
                         0.07-6,5000 cm³/m²Â·d (Optional)
                         Resolution: 0.001 cm³/m²Â·d
             Package:
                          0.0001~62 cm³/pkg·d              
                          Resolution: 0.00001 cm³/m²Â·d
Specimen amount: 3 specimens, independent                              
Temperature range: 5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH
Humidity accuracy: ±1%RH
Test area: 50 cm²
Specimen size:
             Film:  size:>=150mm * 94mm
                      Thickness: less 5mm
             Package:
                       Max size: D120mm * 400mm
Carrier gas: 99.999% Nitrogen
Carrier flow: 0~20 ml/min
Gas interface: 1/8 inch 
Power supply: AC 220V 50Hz 
Dimension: 730mm * 590mm * 350mm 
Net weight: 57kg

Standards:
ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2, GB/T 19789, 
JIS K7126-B, YBB 00082003 

Configuration:
Delivery:  Main unit, computer, OX-TRANS software, temperature controller, tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional:  Package fixtures, reference film, vacuum grease, sample cutter, DSM system.
Note: Specifications are subject to change without prior notice.

Packing:



Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 

Oxygen Permeability Tester/Analytical Instruments/Gas Analyzer
Application:

     TR-OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
Films: 
Plastic films, aluminum foil, aluminized films, plastic composite films, paper-plastic composite films, coextruded films, aluminum foil composite films and many others.

Packages: 
Plastic, rubber, paper, paper-plastic composite, glass and metal packages, e.g. red wine bottles, blister, various plastic bottles, Coke bottles, peanut oil packages, Tetra Pak materials, vacuum bags, metal three-piece cans, plastic packages for cosmetic, soft tubes for toothpaste, jelly and yogurt cups.

Feature:

1.Coulometric sensor method
2.Patent technology
3.Film and package test
4.3 specimens test simultaneously and independently
5.One-button test, test automatically in whole process
6.Multiple test modes optional
7.Data curves display
8.Computer control 
9.Digital flow adjustment 
10.3 Chambers temperature sensor embedded in
11.Environment temperature and humidity sensor inside 
12.Chambers water bath technology 
13.Unit based on embedded system,24bit Δ-Σ AD 
14.Pressure, oxygen and  temperature overload protection 
15.Traceable reference film calibration
16.Supports DSM system (DSM, lab data management system)
Principles
Film:
The specimen is clamped between the upper and lower chamber, the upper chamber is purged by a oxygen stream, and the other side of specimen, lower chamber is purged by a stream of nitrogen, due to the effect of oxygen concentration gradient at two sides of the specimen, oxygen molecules will permeate through the specimen into the nitrogen side,  penetrated oxygen molecules will be carried to the coulometric sensor which generates the proportional signal, so oxygen transmission rate and permeability coefficient will be obtained by calculating the sensor signal.
Package:
The package is mounted on the lower chamber, the outside of the package is air or a pure oxygen stream, the inside of the package is purged by a nitrogen stream, oxygen will permeate through the wall into the inside of the package, penetrated oxygen molecules will be carried to the coulometric sensor which generates the proportional signal, so oxygen transmission rate will be obtained by calculating the sensor signal.

Specification:
Test range:
         Film:  0.01-6500 cm³/m²Â·d (Standard)     
                         0.07-6,5000 cm³/m²Â·d (Optional)
                         Resolution: 0.001 cm³/m²Â·d
             Package:
                          0.0001~62 cm³/pkg·d              
                          Resolution: 0.00001 cm³/m²Â·d
Specimen amount: 3 specimens, independent                              
Temperature range: 5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH
Humidity accuracy: ±1%RH
Test area: 50 cm²
Specimen size:
             Film:  size:>=150mm * 94mm
                      Thickness: less 5mm
             Package:
                       Max size: D120mm * 400mm
Carrier gas: 99.999% Nitrogen
Carrier flow: 0~20 ml/min
Gas interface: 1/8 inch 
Power supply: AC 220V 50Hz 
Dimension: 730mm * 590mm * 350mm 
Net weight: 57kg

Standards:
ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ISO 15105-2, GB/T 19789, 
JIS K7126-B, YBB 00082003 

Configuration:
Delivery:  Main unit, computer, OX-TRANS software, temperature controller, tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional:  Package fixtures, reference film, vacuum grease, sample cutter, DSM system.
Note: Specifications are subject to change without prior notice.

Packing:



Company Information:
      As a diversified manufacturer of high-tech products, it was founded in 1999, and devoted to the products, sales and technical service for various industries and fields like Energy analysis instrument, Oil, coal, steel, and geology; medical analysis and application instruments, biochemistry analyzer, elisa reader, blood analyzer,and urine; as well as laboratory application instruments,autoclave/sterilizer,freeze dryer, incubator,drying oven,balance,ICP,DRS,HPLC,gas chromatography,and spectrophotometer,meanwhile,TRYTE Technologies integrated and purchased some companies of PCB board, highway instruments at home and abroad. Our company has become the "one stop" instrument procurement service provider worthy of the name.
      TRYTE technologies (TRYTE) mainly sell products by selling direct to customer, but also through distributors, resellers and manufacturer representatives, telephone sales and e-commerce sales, customers cover all over 80% of the world's countries and regions.TRYTE have solutions with rules adaptability according to the specific requirements of the design, from the instrument to some laboratories or departments.Whichever kind of solution you choose, you can fully trust it, because it is proved from 100, 00 successful results, leading development process, and decades of actual certification experience.



Why choose us?
1. We supply high quality products with reasonable price.
2. We are the professional manufacturer;
3. Advanced production machine;
4. Strict quality control system;
5. Ten people research&develop team;
6. We have professional sales team;


 

Plastic Single Double Shaft Shredder Machine

Plastic Single Double Shaft Shredder Machine can be used for shredding waste plastic products, plastic film, rubber products, wove bag, fiber, paper, wood and some parts of electrical equipments. Such as wasted junks in the die, large plastic pipe, packing buckets and splints of the fork lift truck. The customer can choose the satisfied model according to the size of the waste products and the capacity you want to get.

Electrical:The machine is controlled by PLC system, the blade can be rotated in opposite direction, and also will close automatically if something unexpected happen, with very high safety service

Character:

1. The blade base and blade on the rotary roller can be disassembly .it is easy to clean and maintenance.

2. The rotary blade adopt the V design, It can decrease the noise and decrease energy consumption.

3. Each rotary blade with 4 cutting knife edge, when the rotary blade is wear, it can be rotated to 90 degree, then the blade can continues use.

4. Each fixed blade with 2 cutting knife edge, when the fixed blade is wear, it can be rotated to 180 degree, then the blade can continues use.

5. The main axis is drive by gearbox, its running very stably, low noise and strong power.

Plastic Single Double Shaft Shredder Machine,double shaft shredder,single shaft shredder,double shaft shredder machine

zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com