K01 Switch for TIG Welding Torch

Note: All mentioned names, Trademarks and Part No. are the property of their respective manufacturers, all consumables are not original, are manufactured and sold by HUARUI CO., reference to the original manufacturer is for convenience only.


Company information:
 
Changzhou Huarui Welding & Cutting- Famous manufacturer of welding and cutting equipment and  accessories in China,located in XiaZhuang, XueYan Industrial park,ChangZhou city, covers an area of  32000m2 , and have 280 staffs. 

Since the establishment in 1985, the company has become one of the biggest manufacturers of welding and cutting equipment and accessories in China by modern manufacturing equipment  and special technology. The product has gained ISO9001, CCC, CE, ROHS, SGS, TUV  certification.

The company specialized in manufacturing MIG, TIG, PLASMA, Welding Torches and Spare parts. The annual output of Welding Torches exceed 450000 sets,annual output of contact tips exceed 17000000pcs The products are mainly for exporting, can fit different kinds of foreign  equipment, and gain high reputation from customers on the basis of best quality and Service. 


2015 our welding fair,welcome your visiting:
1)Shanghai Essen Fair: 2015/6/16-19:             Booth No. E6415-6420
2)Brasil Welding Show, Sau Paulo: 2015/10/20-23: Booth No. C26               
3)Chicago, USA : 2015/11/9-12:                        Booth No. N23059 

PERSONAL PROTECTION

 It is essential that the operator and helpers be properly clothed and protected because of the heat, ultra-violet rays, and sparks, produced by the arc welder (See Figure 3). For body protection a pair of fire retardant long sleeved coveralls without cuffs is a good choice. Always avoid clothing with tears, snags, rips, or worn spots as these are easily ignited by sparks. The sleeves and collars should be kept buttoned. The hands should be protected with leather gauntlet gloves. A pair o high top leather shoes, preferably safety shoes, is good protection for the feet. If low shoes are worn the ankles should be protected by fire resistant leggings. Eyes should be protected by transparent goggles if the person wears prescription glasses or safety glasses if not. A welding helmet or hand shield with filter plate and cover plate is mandatory for eye protection from the harmful rays of the arc. The filter plate should be at least shade #10 for general welding up to 200 amps. However, certain operations such as carbon-arc welding and higher current welding operations require darker shades. Never use a helmet if the filter plate or cover lens is cracked or broken. A flame-proof skull cap to protect the hair and head as well as hearing protection in noisy situations is recommended.
Plastic disposable cigarette lighters are very dangerous around heat and flame. It is very important that they not be carried in the pockets while welding. Always provide protection to bystanders or other workers by welding inside a properly screened area, if possible. If unable to work inside a screened area then protection to others should be provided by a portable screen or shield, or by their wearing anti-flash goggles.

SAFE OPERATION OF THE WELDER

It is important that anyone operating an arc welder be instructed on its safe use by a qualified teacher or welder.
Because of their potentially explosive nature, we strongly recommend that no welding, cutting, or hot work be attempted on used drums, barrels, tanks, or other containers under any circumstances.

If possible, work to be welded should be placed on a firebrick surface at a comfortable height. Welding should never be done directly on a concrete floor. Heat from the arc can cause steam to build-up in the floor which could cause an explosion. The welder cables should be positioned so that sparks and molten metal will not fall on them. They should also be kept free of grease and oil and located where they will not be driven over.

Electric welders can kill by electric shock. If the welding operation must be done on steel or other conductive material an insulating mat must be used under the operator. If the welding area is wet or damp or the operator is actively perspiring then he/she should wear rubber gloves under the Welding Gloves.

It is easier and safer to establish an arc on a clean surface than a dirty or rusty one. Therefore, metal should always be thoroughly cleaned by wire brushing or other method prior to welding. When chipping slag or wire brushing the finished bead the operator should always be sure to protect his eyes and body from flying slag and chips. Unused electrodes and electrode stubs should not be left on the floor as they create a slipping hazard. Hot metal should be handled with metal tongs or pliers. When quenching hot metal in water it should be done carefully to prevent painful burns from the escaping steam. Any metal left to cool should be carefully marked "HOT" with a soapstone. When welding is finished for the day or suspended for any length of time electrodes should be removed from the holder. The holder should be placed where no accidental contact could occur, and the welder should be disconnected from the power source.

SAFETY PRECAUTIONS FOR ENGINE POWERED WELDERS
Always operate in an open well-ventilated area or vent the engine exhaust directly outdoors.
Never fuel the engine while running or in the presence of an open flame.
Wipe up spilled fuel immediately and wait for fumes to disperse before starting the engine. *Never remove the radiator pressure cap from liquid cooled engines while they are hot to prevent scalding yourself.
Stop the engine before performing any maintenance or trouble shooting. The ignition system should be disabled to prevent accidental start of the engine.
Keep all guards and shields in place.
Keep hands, hair, and clothing away from moving parts.
FIRST AID

The welding area should always be equipped with a fire blanket and a well stocked first aid kit. It is desirable that one person be trained in first aid to treat the minor injuries that may occur. All injuries, no matter how minor they may seem can become more serious if not properly treated by trained medical personnel.
KEY POINTS TO REMEMBER
Be sure the welder is properly installed and grounded.
Never weld without adequate ventilation.
Take proper precautions to prevent fires.
Protect your entire body with fire retardant clothing, shoes, and gloves.
Wear eye protection at all times.
Weld only in a firesafe area.
Never do any welding, cutting, or hot work on used drums, barrels, tanks, or other containers.
Mark metal "HOT" with a soapstone.
Keep a well stocked first aid kit handy.

Welding Protection

Welding Protection,Auto-Darkening Welding Helmet,Welding Gloves,Welding Glasses

Changzhou Edaweld Trading Company Limited , http://www.edaweld.com