Fiber Optic Transmission Energy Feedback Galvanometer Welding

Fiber optic transmission energy feedback galvanometer welding



Application industry

* 3C electrical metal parts welding
* Mobile phone precision parts welding
* Precision stamping connector welding
* Precision medical equipment welding
* All kinds of metal spot welding, stack welding and so on


Features:

  Laser welding system is the use of pulsed xenon lamp pumped Nd: YAG laser crystal output 1064nm wavelength laser,Real-time control of laser power negative feedback technique with arbitrary waveform ensures good stability and repeatability of laser power and its waveform in working condition,Product laser power from 200W to 600W covered a small, medium and high power system,Basically meet the needs of precision welding industry.Mainly for thin-walled materials, precision parts of the welding,Can achieve spot welding, butt welding, stack welding, sealing welding and so on,With high aspect ratio, small weld width, small heat affected zone, small deformation, fast welding speed, weld formation, beautiful, high weld quality, no stomata, precise control, small focusing spot, high positioning accuracy,Optical fiber transmission easy to achieve automation.In the battery industry, IT industry, electronic devices, optical communications industry, the sensor industry, the hardware industry, auto parts industry, mold repair industry, jewelry welding industry, glasses industry, porcelain teeth, solar industry, electric industry has been widely used.

Product advantages:  

 Energy negative feedback laser welding machine works is the output of the laser to add an energy detection device used to detect the size of laser energy,And real-time feedback of the signal to the control side, compared with the theoretical set of energy to form a closed-loop control system to achieve accurate control of laser energy output purposes.    Energy negative feedback technology can make the laser output energy has good repeatability, in simple terms, is to ensure that each output of laser energy stability,This can effectively improve product productivity.    The output waveform can be arbitrarily set according to the welding material, shape and so on In the specific parts of the welding process, according to the work of the shape and material,Change the output waveform of laser energy,Can greatly improve the quality of welding,And even some of the traditional laser welding problems can also be resolved by changing the output waveform of the laser.    Laser can achieve multi-fiber output at the same time ,Compared with the traditional hard light output system, you can increase the degree of freedom of processing,Can be multi-beam at the same time processing and multi-station processing, for more sophisticated welding provides the conditions.


Technical Parameters
 

Sample graph showing







Our core advantages:

1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser Cutting Machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.

We are looking for distributor. Price is more competitive.
Videos: www.facebook.com/dapenglaser    www.linkedin.com/in/dapenglaser 
Presentation video: https://youtu.be/17WQW78NgOQ Fiber optic transmission energy feedback galvanometer welding



Application industry

* 3C electrical metal parts welding
* Mobile phone precision parts welding
* Precision stamping connector welding
* Precision medical equipment welding
* All kinds of metal spot welding, stack welding and so on


Features:

  Laser welding system is the use of pulsed xenon lamp pumped Nd: YAG laser crystal output 1064nm wavelength laser,Real-time control of laser power negative feedback technique with arbitrary waveform ensures good stability and repeatability of laser power and its waveform in working condition,Product laser power from 200W to 600W covered a small, medium and high power system,Basically meet the needs of precision welding industry.Mainly for thin-walled materials, precision parts of the welding,Can achieve spot welding, butt welding, stack welding, sealing welding and so on,With high aspect ratio, small weld width, small heat affected zone, small deformation, fast welding speed, weld formation, beautiful, high weld quality, no stomata, precise control, small focusing spot, high positioning accuracy,Optical fiber transmission easy to achieve automation.In the battery industry, IT industry, electronic devices, optical communications industry, the sensor industry, the hardware industry, auto parts industry, mold repair industry, jewelry welding industry, glasses industry, porcelain teeth, solar industry, electric industry has been widely used.

Product advantages:  

 Energy negative feedback laser welding machine works is the output of the laser to add an energy detection device used to detect the size of laser energy,And real-time feedback of the signal to the control side, compared with the theoretical set of energy to form a closed-loop control system to achieve accurate control of laser energy output purposes.    Energy negative feedback technology can make the laser output energy has good repeatability, in simple terms, is to ensure that each output of laser energy stability,This can effectively improve product productivity.    The output waveform can be arbitrarily set according to the welding material, shape and so on In the specific parts of the welding process, according to the work of the shape and material,Change the output waveform of laser energy,Can greatly improve the quality of welding,And even some of the traditional laser welding problems can also be resolved by changing the output waveform of the laser.    Laser can achieve multi-fiber output at the same time ,Compared with the traditional hard light output system, you can increase the degree of freedom of processing,Can be multi-beam at the same time processing and multi-station processing, for more sophisticated welding provides the conditions.


Technical Parameters
 

Sample graph showing







Our core advantages:

1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser cutting machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.

We are looking for distributor. Price is more competitive.
Videos: www.facebook.com/dapenglaser    www.linkedin.com/in/dapenglaser 
Presentation video: https://youtu.be/17WQW78NgOQ

Metal Tube And Sheet Cutting Machine

Cutting mode: Laser cutting

Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.

1.Product describe

Our company have both CO2 and Fiber laser machines. They can cut various type of metals such as aluminium, mild steel and stainless steel. Fiber laser machine can even cut brass and copper. These machines can cut various profiles with smooth and high quality surface finish.

Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.

2. Product features

Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.

Can remote operation, convenient and efficient, save labor.

Imported cutting head, optical glass, focusing is convenient and cutting perfect.

Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.

Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.

High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.

3. Product parameters

Type	TS-3015
Effective cutting width ( mm)	1500
Effective cutting Length ( mm)	3000
Circular tube diameter ( mm)	10-150
Square tube size ( mm)	10-150
Range of vertical stroke ( mm)	0-200
Input power	AC380V/50Hz;AC220V/50Hz
Cutting thickness ( mm)	0.3-15
Cutting speed ( mm)	21000 (1000W/stainless δ1mm)
Idle speed ( mm)	100000
Maximum Acceleration (G)	1.2
Position repeat accuracy ( mm)	±0.05
Laser power (w)	500-1500
Drive mode	Precision rack bilateral drive
Laser wavelength ( nm)	1080
Cooling mode	water-cooling
Environmental temperature	5-35℃
Cutting material	Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet

Laser Tube Cutting Machine,Laser Iron Sheet Cutting Machine,Integrated Cnc Cutting Machine,Tube Sheet Integrated Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com