![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
2)Strong impact & low pressure
3)No lubrication
4)High Efficiency
5)ISO9001 & CE approved
Explosion-proof:
-Strong impact & low pressure
-Low air consumption
-Full adjustable PTR
-No lubrication
-Working pressure for the 2-7bar
-High Efficiency
Selection:
NTP25 - applies to below 4mm thickness
NTP32 -applies to below 6mm thickness
NTP48 -applies to below 8mm thickness
| Specification: | ||||
| Model | Torque | Impact frequency | Weight kg | Air consumption |
| NTPÂ -25 | 80-1000 | 150-1900 | 4.5 | 0.5-1.1 |
| NTPÂ -32 | 150-2500 | 140-2800 | 9.5 | 1.2-1.7 |
| NTPÂ -48 | 150-4680 | 130-5700 | 11.1 | 2.2-3.3 |
| Warning: Pneumatic vibrators will do destructions to equipment, if the vibration force is over power, please adjust to the proper air pressure. | ||||
A ball bearing is a type of Rolling-Element Bearing that uses balls to maintain the separation between the bearing races.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least three races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball Bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
Ball Bearings
Ball Bearings,Precision Ball Bearings,Stainless Steel Ball Bearing,Non-Standard Ball Bearing
Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com