Automatic Biomass Waste 500kg/H Wood Pellet Production Line for Sale

1. Introduction for Pellet Production Line:
The biomass straw pellet production line makes the biomss wood pellet with sawdust. Collect the material and mix, adjust the quality, make one, small and roundish thing to cool dry, Sift the process of grading to form. The technological process is rational in succession, every unit performance is good, the aircrew structure is compact, the area of occupation of land little, the energy consumption bottom, it is convenient to operate it and maintain. It is also useful for kinds of grain straw for the pellets.


2. Raw material requirements:

More kinds of sawdust/Wood Chips Rice husk Groundnut-shell Maize/Jowar/Bajra Stalks Cobs Husk Paddy Sunflower Straw Stalks Cotton crop Stalk Wheat Straws Forestry wastes chemical waste solid powder materials and many other Agro wastes.

Moisture Content: 10~15%;      Material size: ≤ 5*5 mm.


3. Main process of Wood pellet line/plant:

1)  Wood pellet production line can press 6.8.10 mm diameter biomass fuel pellet and fertilizer pellets ,such as biomass waste from sawdust, rice husk, coffee husk, agricultural stalk, straw, peanut shell, sun flower seed, palm shell, paper, plastic ect, such as fertilizer materials from animal manure ,plant waste etc . The length of final pellet can be adjusted.
 
2)  This line contains Drying process, Pelletizing process, Cooling process, Screening pellet process and Packing process, low invest and high working efficiency.
  
3)  Wood Pellet production line is mainly air conveying materials way, existing far less dust than belt conveyor or bucket elevator conveying way, saving much place and price, also existing less dust.
  
4)  Pellet production line capacity is from smaller 500kg/h to bigger 10ton/h; hundreds of lines are installed in China and abroad, such as Bulgaria, France, Serbia, Sweden, Greece, Romania, Malaysia, Vietnam.

5) The key pellet machine integrates both Ring die pellet machine and Flat die pellet machine advantages, which can feed materials vertically and directly go to pelletizing room, also the biomass pellet machine has one two-- layer die inside, when die works, only bottom layer work .rollers moving, die stable, produce high pressure between rollers and die .when it works, the top layer will rebound splashed materials to bottom working place .making pressing pellets process distributed evenly.
  
6) The pellet machine contains Automatic lubrication oil systems, which can lubricate rollers, shaft, bearings and gears automatically, the pressure between rollers and die can be adjusted automatically to fit for different materials pressure ratio.
 
7) Wood pellet line machines Spare parts are made by ourselves, mostly are made by CNC systems, through high technology heat treatment, we can ensure its high quality and good precision.

The Vacuum Oven is an oven that uses two-sided heat radiation.

1. Inner box material: The inner box adopts SUS stainless steel with high temperature and corrosion resistance on the international market at present, and the thickness of the steel plate is 3mm, so that your product can be processed in a clean working environment without being affected by the unclean environment.
2. Material of outer box: The outer box adopts the 1.5mmSECC steel plate commonly used in the international equipment industry. The outer surface of the steel plate adopts a precise double-layer powder paint treatment. Compared with the usual exterior coating process, the appearance is more beautiful and enhances its anti-corrosion protection. Rust performance.
3.Insulation Material: Our thermal insulation material is made of imported stone insulation wool with strong thermal insulation performance, which has more thermal insulation performance than ordinary insulation cotton. It has very good effect for your energy saving and reducing the impact on the ambient temperature of the equipment. Good performance.

1. The heat-generating material is a heat-resistant heat pipe;
2, the temperature setting range: RT +10 °C ~ 250 °C, free to set the temperature you want;
3, programmable thermostat: free to adjust the heating time to reach the desired temperature;




Temperature control system
Using PID microcomputer automatic temperature control system, sensing the temperature of the box studio through the sensitive detection control head, feedback to the microcomputer, through the microcomputer's automatic and rapid program operation, quickly and automatically adjust the output power of the output to achieve precise control At the precise value set.




Temperature control system
The adopted PID microcomputer automatic temperature controller can alarm and stop the power output of the machine studio by setting the internal upper and lower temperature limits so as to protect the products in the machine table from unnecessary overheating. Loss.
1. Over-temperature protection system: The machine is equipped with an over-temperature protection system at the power supply input of the whole machine and automatically blows the fuse system when the power is too high.
2. High temperature protection system: When the temperature is out of control due to external force, the system will automatically stop the power supply of the whole machine when the temperature exceeds the set temperature of 10 degrees, thereby protecting the safety of your products and machines.
3. Over-current protection system: When the power of the whole machine exceeds the normal power due to excessive applied voltage or other reasons, the system will automatically power off and protect the industrial control components of the whole machine from being damaged.

Vacuum Oven

Vacuum Oven,Industry Vacuum Oven,Led Display Oven,Electronic Heat Dry Age Cabinet

Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , http://www.jatentech.com