2HP Roots Booster Vacuum Pump

Pump description:

Model ZJ Mechanical Booster Pump, also known as a Roots pump, is a volumetric pump.
It employs a pair of rotors, identical and in 8-figure with certain clearance between them
in the pump housing, rotating at the same speed in opposite directions to perform
function of suction and discharge of gas. The two rotors are supported by rolling bearings
in the end covers of the pump, rotating at high speed and are kept at a
fixed relative position by a pair of timing gears. The end clearance between rotors and
end covers are fixed by adjustable metal shims between the bearing housings and the
end cover at the fixed end, which ensures one-direction expansion of the rotor when
temperature rises during its operation.

Four sets of inner seals (also known as piston ring) in the two end covers prevent lube oil
entering into the pump housing. The shaft seal at the front-end cover, also called as
framework oil seal or shaft seal, prevents leakage of air into the pump housing.

In order to reduce temperature of the pump, all models of pumps (expect the two
smallest models) are equipped with a gearbox cooler and front-end cover cooler.

Power is transmitted through a coupling or V-belt from the motor to the driving shaft of
the pump and then through synchronizing gears to the driven shaft

Specifications:
Applications:
The main  advantage  of Roots  vacuum pump  is that  it can  operate  with high  pumping speed under  lower suction  pressures, however,  has to  be backed by  a backing  pump.Under  normal working conditions, it is  permissible to not add  by-pass pipes.Roots vacuum pump should not operate with a higher-pressure  difference than allowable,otherwise  overheating   and   overload  will   cause  damage   of  Roots   vacuum  pump.
Therefore, proper backing pump and necessary protection devices must be considered.Oil sealed mechanical  pump is usually  selected as   the fore   vacuum   pump.  Other   types   of backing   pumps   may   be   used   where    their requirement for ultimate vacuum is not too  strict. Particularly, when gas  pumped containing large amount of  vapor, water-ring vacuum pump  maybe   an  ideal   option  though   ultimate  vacuum achieved is on the low side.

Product display:

Packaging:

1. Standard export polywooden cases.

2. Customized packaging can be available.

Shipping:

Our services:

Pre-Sales Service

1. Provide 24-hour reply.

2. Provide suitable models according to clients' requirements.

3. Provide detailed product specifications and reasonal prices. 

In-Sales Service

1. Supervise whole production time. 

2. Provide product's testing performance curve to customers.

3. Provide inspection pictures to customers after we finish production.

After-Sales Service

1. Provide installation manual.

2. Under correct installation, normal maintenance and using,we guarantee one-year warranty.

3. If product has malfunction,we'll reply you within 24 hour and provide solution or even send technical staff to spot after receiving maintenance notification.

FAQ:

1.  Q: Are you a manufacturer or trading company?

    A: We are manufacturer of vacuum pumps and water pumps in China since 1986.

2.  Q: What's your MOQ?

    A: One set is ok.

3.  Q: What's your payments terms?

    A: T/T, Western Union......

4.  Q: What certificates do you have?

    A: CE, ISO 9001 ....

5.  Q: How about the warranty?

    A: 12 months warranty since delivery.

6.  Q: What's the delivery time?

    A: For different models,different motor specs and different material,delivery time is different,please double confirm with our sales team.

7.  Q: Can you do OEM brand?

    A: Yes, welcome.

8.  Q: Quality reliable?

    A: We have whole testing system controlled by micro-machine,testing performance curve can be sent to clients before arrange delivery.
 

Company overview:
Established in 1986, our company has been focusing on the development and manufacture of vacuum pumps and water pumps.We are a comprehensive pump company integrating production, sales and after-sales maintenance services.

The main products include liquid ring vacuum pumps;rotary vane vacuum pumps;roots vacuum pump;centrifugal water pump and customized vacuum pump system,which are widely used in all kinds of plastic extrusion line;medical and pharmaceutical industry(autoclave sterilizer/capsule filling and sealing machine);food-related industry(beverage machine/milking machine/sugar plant);chemical industry;power plant;coal mine etc.




Contact us:

  Pump description:

Model ZJ Mechanical Booster Pump, also known as a Roots pump, is a volumetric pump.
It employs a pair of rotors, identical and in 8-figure with certain clearance between them
in the pump housing, rotating at the same speed in opposite directions to perform
function of suction and discharge of gas. The two rotors are supported by rolling bearings
in the end covers of the pump, rotating at high speed and are kept at a
fixed relative position by a pair of timing gears. The end clearance between rotors and
end covers are fixed by adjustable metal shims between the bearing housings and the
end cover at the fixed end, which ensures one-direction expansion of the rotor when
temperature rises during its operation.

Four sets of inner seals (also known as piston ring) in the two end covers prevent lube oil
entering into the pump housing. The shaft seal at the front-end cover, also called as
framework oil seal or shaft seal, prevents leakage of air into the pump housing.

In order to reduce temperature of the pump, all models of pumps (expect the two
smallest models) are equipped with a gearbox cooler and front-end cover cooler.

Power is transmitted through a coupling or V-belt from the motor to the driving shaft of
the pump and then through synchronizing gears to the driven shaft

Specifications:
Applications:
The main  advantage  of Roots  vacuum pump  is that  it can  operate  with high  pumping speed under  lower suction  pressures, however,  has to  be backed by  a backing  pump.Under  normal working conditions, it is  permissible to not add  by-pass pipes.Roots vacuum pump should not operate with a higher-pressure  difference than allowable,otherwise  overheating   and   overload  will   cause  damage   of  Roots   vacuum  pump.
Therefore, proper backing pump and necessary protection devices must be considered.Oil sealed mechanical  pump is usually  selected as   the fore   vacuum   pump.  Other   types   of backing   pumps   may   be   used   where    their requirement for ultimate vacuum is not too  strict. Particularly, when gas  pumped containing large amount of  vapor, water-ring vacuum pump  maybe   an  ideal   option  though   ultimate  vacuum achieved is on the low side.

Product display:

Packaging:

1. Standard export polywooden cases.

2. Customized packaging can be available.

Shipping:

Our services:

Pre-Sales Service

1. Provide 24-hour reply.

2. Provide suitable models according to clients' requirements.

3. Provide detailed product specifications and reasonal prices. 

In-Sales Service

1. Supervise whole production time. 

2. Provide product's testing performance curve to customers.

3. Provide inspection pictures to customers after we finish production.

After-Sales Service

1. Provide installation manual.

2. Under correct installation, normal maintenance and using,we guarantee one-year warranty.

3. If product has malfunction,we'll reply you within 24 hour and provide solution or even send technical staff to spot after receiving maintenance notification.

FAQ:

1.  Q: Are you a manufacturer or trading company?

    A: We are manufacturer of vacuum pumps and water pumps in China since 1986.

2.  Q: What's your MOQ?

    A: One set is ok.

3.  Q: What's your payments terms?

    A: T/T, Western Union......

4.  Q: What certificates do you have?

    A: CE, ISO 9001 ....

5.  Q: How about the warranty?

    A: 12 months warranty since delivery.

6.  Q: What's the delivery time?

    A: For different models,different motor specs and different material,delivery time is different,please double confirm with our sales team.

7.  Q: Can you do OEM brand?

    A: Yes, welcome.

8.  Q: Quality reliable?

    A: We have whole testing system controlled by micro-machine,testing performance curve can be sent to clients before arrange delivery.
 

Company overview:
Established in 1986, our company has been focusing on the development and manufacture of vacuum pumps and water pumps.We are a comprehensive pump company integrating production, sales and after-sales maintenance services.

The main products include liquid ring vacuum pumps;rotary vane vacuum pumps;roots vacuum pump;centrifugal water pump and customized vacuum pump system,which are widely used in all kinds of plastic extrusion line;medical and pharmaceutical industry(autoclave sterilizer/capsule filling and sealing machine);food-related industry(beverage machine/milking machine/sugar plant);chemical industry;power plant;coal mine etc.




Contact us:

 

Material: Q235 / Q345 / Carbon Steel / Ductile iron

Process: Forging / Investment Casting / Machining

Surface: Zinc / Chromium / Electro Plating / Dacormet / Painting

Unit Weight: 0.2-3KG

 

Looking for ideal Trio Clamps Formwork Clamps Peri Clamps Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Formwork Lock Wedge Lock Scaffolding Accessories are quality guaranteed. We are China Origin Factory of Construction Scaffolding Formwork Steel Clamp. If you have any question, please feel free to contact us.

Construction Series

Construction Parts,Self Drilling Anchor,Scaffolding Fastener Parts,Construction Formwork Accessories

J.B MACHINERY (NINGBO) CO., LTD. , https://www.jbcastings.com